Fluid o tech clamp ring pump 100 L/H compact

The rotation pump on this page is made by Fluid o tech. This model of pump is designated as a Compact model. The pump has the Fluid o tech code CA0104AGAFN0000 or CA0104AGANN0000.

This specific model of Fluid o tech pump is type which is called a clamp ring pump. This pump type is mated against the face of a espresso machine motor and a clamp is placed around it. By tightening the clamp, the pump is fixed to the motor. The shaft type on this pump is a standard square shaft. The length of the pump without the shaft sticking out is 58,5mm.

This compact type of pump has a flowrate of 100 L/H and is fitted with a balanced bypass. But how do I change the pump pressure on this pump? By screwing in the hex nut you will increase the pressure and unscrewing the hex nut you will decrease the pressure.  And of course, first always loosen the locking nut.

The in and outlets on this pump require a 3/8” BSP-G fitting. This is also the same with the pumps made by Nuert.

If you are not sure if this Fluid o tech rotation pump is suitable for your espresso machine, don’t hesitate and contact us.