Specifications
This Fluid o tech rotation pump is a more uncommon version in the world of espresso machines and only used by a selection of brands. The part is designated as a “standard” pump and the part number for this pump is PO0204FNADN0000. This pump has a NSF approval.
The espresso machine pump on this page has a flowrate of 200 L/H and is equipped with a balanced bypass. If you want to connect hoses to the in and outlet of this rotation pump you will need to install a 3/8” NPT fitting. Note: this is not a common size with Fluid o tech pumps.
The pump you see on this page is a bolt on flange pump. The motor has a flange on it with multiple boltholes. You first need to slide the motor coupling set over the shaft of the motor, line up the D shaft. Now you can slide the D shaft over the coupling and make the flange of the pump and motor flush to each other. Now you can install the 3 bolts to clamp the pump to the motor.
As mentioned before this more uses a D shaft. This shaft is round with a flat section on it. The length of this pump, without shaft, is 86,5mm.
On what kind of espresso machines can I find this model of pump? On the Faema E91, Faema E92, Faema E97, Faema E98, Faema Due and the Faema Smart.
Extra Info
| Pump brand | Fluid o tech |
| L/H | 200 |
| Fitting | 3/8" BSP-G |
| Type pump | Rotary vane |
| Type part | Rotation pump |
| Brand | Faema |
| Pump coupling | Bolt flange |
| Pump flowrate (L/H) | 200 |
| Pump brand | Fluid o tech |
| part number | fluid o tech PO0204FNADN0000, Fluid o tech PO204F, Fluid o tech PA0204FNADN0000, Fluid o tech PA204F |
Reviews (0)
No customer reviews for the moment.
Other Products
