On this page you will find a portafilter gasket suitable for various brands like Grimac, Astoria, Bezzera, Wega and Brasilia. This portafilter gasket is made in Italy. The outer diameter of the gasket is 72mm, the inner diameter is 56mm and the thickness of is 8mm. You can use this portafilter gasket on brewing groups like the Grimac G11, Brasilia...
The o ring on this product page can be used on various espresso machine brands such as Astoria, Wega, Faema and Victoria Arduino. The Victoria Arduino part reference number is 02280047, For Astoria it is 12300026 and for Wega WY12300026. The part references for Faema are 402215000 and 4701135932. This o ring has been made from EPDM. The cord...
The shower holder diffuser on this page is used for a couple of models produced by the Astoria CMA group. For the Astoria you can find this item on the Astoria Argenta, Astoria Brava, Astoria Denise, Astoria Dora, Astoria Lisa and Astoria Pratic. For the Wega espresso machines you can find them on the Wega Venere and the Wega Concept 56. This item...
The fitting on this page is a plug which can be used on various Astoria and Wega espresso machines. The Astoria part reference of this 25789306 and the Wega part reference is WY25789306. This cap has a male thread and a outer diameter of 18mm. the item has been made in Italy. You can use this plug on the Wega Start, Wega Venere, Astoria Divina,...
On this page you will find a copper gasket which you will mainly find on a variety of San Remo espresso machines. Mainly in boiler and hydraulic systems of the San Remo. The San Remo part reference of this part is 10852180. This flat copper gasket has a outer diameter of 19mm a inner diameter of 13,5mm and a thickness of 1,5mm. This copper gasket is made...
On this page you will find one of the most used brewing group solenoid valves in espresso machines. But this is instead of a 230V version a 115V version. This solenoid valve has been manufactured by the company Parker. The Parker parts reference for this solenoid valve is 393106J or 393111J This 3-way solenoid valve is a model with a flat flange, this...
The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve. Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...
The item on this page is a 3 way solenoid valve made by the brand Lucifer. This item is slightly different, seen it’s not a standard 220/230V model. But it is a 110V model. This 3 way valve can be used on a variety of espresso machine brands such as Casadio, Brugnetti, San Marco, La Scala, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli, La...
Most of the pump driven espresso machines use a 3 way solenoid valve the control the brewing process. On this page you will find a ODE solenoid valve made by the Italian company ODE. The solenoid valve number is: 31A1AR15-VORV This specific model is a flanged model. So it is bolted against a flat machined surface with 4 allen bolts. These surfaces are...
On this page you will find a 110V 3 way solenoid valve made by the Italian manufacturer ODE. This specific model 31A1AR15 is made in Italy. This model is a flange solenoid valve. So it is bolted with 4 Allen bolts against a flat surface and is sealed of by 2 o rings at the bottom. In the brass body of the solenoid valve, you will find a orifice of 1,5mm....
The upper drain sleeve body on this page can only be used on various Astoria and Wega espresso machines. The Wega part reference for this item is WY25739502 and the Astoria reference is 25739502 and 4825739502 This item does look like a upper drain sleeve used on the E61 style of brewing groups. But it is not suitable for that...
The solenoid valve on this page is slightly different then the flanged 3 way solenoid valve. Instead of the traditional brass solenoid valve flange is this one made from stainless steel. This parker 3 way solenoid valve is mainly used as a brewing group solenoid valve. The Parker part number for this item is 3019F1GRG7XS03XS6 and 131FSG100 As mentioned...
The portafilter gasket on this page is a alternative to the original portafilter gaskets made by the Astoria CMA group. The design of this portafilter gasket is similar to the original and is also made in Italy. The corresponding Astoria part number is 12217 and the one of Wega is WY12217 The outer diameter of this portafilter gasket is 72mm,...
The item on this product page is a o ring which can be used on various brewing groups made by the Astoria CMA group, so on Astoria and Wega brewing groups. The Astoria part reference number for this item is 12304 and for Wega it is WY12304. This o ring has been made from EPDM. The cord diameter is 3,53mm and the internal diameter is 47,22mm. This o...
The Italian solenoid manufacturer ODE is currently the only espresso machine solenoid manufacturer who makes some of their solenoid from the Techno polymer PPS. On this page you see a 3 way solenoid valve made from PPS with the part number 31APBA1R15-13T0 As mentioned before this is a 3 way solenoid valve with a flange. This flange mates against a other...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |