La Pavoni E61 style 01
La Pavoni E61 style 01
There are 29 products.La Pavoni E61 style 01 group parts
E61 upper pipe
(0) The item on this product page is the upper drain sleeve. This drain sleeve can be used with a wide selection of E61 brewing groups. Such as with the brand Faema, ECM, ECM Heidelberg, Isomac, Pavoni, Rocket and San Remo. This drain sleeve has been made from machined brass. This has been afterwards been nickel and chrome plated. The fitting on the inside...
Nuova Simonelli shower screen 56,5mm
(0) The shower screen on this page is marked as shower screen for Nuova Simonelli espresso machines. But it can be used on a variety of different brands such as Victoria Arduino, La Pavoni and various old and new groups of La Carimali. This shower screen has been made by the Italian company IMS Filtri, the part reference for this item is NSDR139. This shower...
Stainless steel shower screen 57mm
(0) On this product page you will find a 57mm shower screen suitable for various espresso machine brands like Bezzera, Promac and Rancilio. This shower screen is made by IMS filtri, the IMS code is RADR152 This stainless steel shower screen has a external diameter of 57mm and a height of 3,7mm. The central hole for mounting the shower screen in the brewing...
Compression spring 13x42mm
(0) This stainless steel compression spring is used in the Faema E61 and E61 style brewing groups. But what does this specific do? Well this is the last compression spring in the brewing group. It is the compression spring in the brewing valve which closes the exhaust valve all the way at the bottom of the E61 brewing group. Besides the E61 group spring it...
Brewing group gigleur 0.6mm
(0) This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...
Stainless steel filter 8.6x22.5mm
(0) The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega. This stainless steel water filter has a outer diameter of 8,5mm...
Faema E61 gasket o ring 18,64x3,53 viton
(0) Faema E61 o ring 18,64x3,53 viton. This o ring seals off the bottom group mushroom.
Faema E61 gasket PTFE 36.5x30x2mm
(0) This PTFE gasket can be used on the famous Faema E61 brewing groups, but also on a variety of E61 style of brewing groups. Like with La Scala, Grimac, Pavoni, Wega and Fiorenzato. The part reference numbers can be found in the extra info tab. This flat gasket is made from the material PTFE. The outer diameter is 36,5mm and the inner diameter is 30mm and...
Gasket PTFE 22x16x2mm
(0) This a universal Polytetrafluoroethylene (PTFE) gasket with 22x16x2mm. The gasket is used on a variety of espresso machine components. This type of gasket found boilers, brewing group and valve assemblies. The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera,...
Faema E61 group spout breaker
(0) The fitting on this product page is the last fitting on various E61 style of brewing groups. The drain fitting. This item can be used on various brands which use the E61 group, such as Faema, Grimac, La Pavoni, Rocket and Wega. This drain fitting has been made from machined brass. Which has been polished, nickel and chrome plated. The thread on one side...
Faema E61 camme spring 15x25mm
(0) This stainless steel compression spring with the dimensions of 15x25mm is normally used as a camme spring on a Faema E61 brewing group or on E61 style brewing groups. Like with the Faema E61, Faema E61 legend, Grimac, Isomac, Pavoni, Wega and a variety of other brands which use a e61 style of brewing group. Besides that option, this model...
Faema E61 sleeve
(0) On this page you will find a camme guide bushing. This part is a generic part for Faema E61 brewing groups and the brewing groups made in the E61 style. This part is made from brass with a total length of 28mm, the outer dimensions are 15 and 10 mm. The ID is 8mm and the head of the bushing has a thickness of 5mm. This part slides over the shaft off the...
Faema E61 plug for camme holder
(0) This ½” chrome plated stuffing nut has a central hole of 10,7mm. The item itself has a height of 17mm. You need a metric key 22 to install this item. This is quite a common key size in most peoples toolbox. But what is the function of this part and where can it be found. This threaded stuffing gland is used in the side of the Faema E61,...
Locking group gasket
(0) If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega,...
E61 style cam holder
(0) The cam holder on this product page can be used on a variety of E61 brewing groups. Like with ECM Heidelberg, La Scala, Bezzera, Grimac, La Pavoni Wega and Brasilia. The cam holder on this page has been made from machined brass. Which have been nickel and chrome plated. For easier installation the edges have been rounded off. The item has a overall...
Faema E61 valve gasket 13x4x4mm
(0) The valve gasket on this page can be used on numerous of espresso machine brands such as Vibiemme, Wega, La Scala, Faema, La Pavoni, Brasilia and Grimac. This gasket in mainly used in the steam and water valves as well as in the water inlet valves. But the best example is in the E61(type) of brewing groups. The part reference list can be found in the...
Faema E61 valve gasket 15,5x7,5x4mm
(0) This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia,...
