The stainless-steel shower screen screw is mainly used on the La San Marco espresso machines. But it can also be used on a few models of the brands Astoria and Wega. The Astoria part reference is 27100001 and for Wega the reference is WY27100001. For the La San Marco part references please check our extra info tab. This shower screen has been made by...
The item on this product page is a flat gasket used on the lever brewing groups of La San Marco. The La San Marco part reference numbers for this item are 109059 and CTSGUA0190. This flat gasket is made from EPDM. The outer diameter is 16mm, the inner diameter is 5mm and the thickness is 4mm. This gasket has been made in Italy.
La San Marco PTFE HX gasket 34x27x2mmReturn to the San Marco group parts overview
On this you will find a paper seal/shim or filler. These paper shims are a handy and cheap solution to fix your portafilter gasket problems. When you use your portafilter the lugs and the bayonet like system of the group wear. So when you use a standard thickness of portafilter gasket it is possible that your portafilter doesn’t seal or goes too...
The portafilter gasket shown on this page can be used on a variety of San Marco espresso machine brewing groups. But the traditional gaskets are made from NBR, but this model has been made from food graded Silicone. The Rancilio part reference for this model of portafilter gasket is 109011 and 109130 This blue silicone portafilter gasket has a...
The valve gasket on this page can be used on numerous of espresso machine brands such as Vibiemme, Wega, La Scala, Faema, La Pavoni, Brasilia and Grimac. This gasket in mainly used in the steam and water valves as well as in the water inlet valves. But the best example is in the E61(type) of brewing groups. The part reference list can be found in the...
The single filterbasket on this page can be used on La San Marco espresso machines. The La San Marco part reference for this filterbasket is 202122. This filterbasket has been made by the Italian company IMS Filtri. The part reference from IMS is SM1T118. This single coffee filterbasket has a outer diameter of 66mm and a height of 25,5mm. This...
The handle knob on this page can be used on Faema E61 brewing groups. This handle goes on the brewing group control lever. Originally these were made from Bakelite, but nowadays that isn’t made that much anymore. The Faema part reference fort his item is 4741135910 This plastic lever brewing group handle is made from a shiny plastic. In the...
On this product page you will find a portafilter gasket suitable for a variety of La San Marco brewing groups. The La San Marco part reference for this item is 109011. This gasket has been made from NBR. The filter holder gasket has a outer diameter of 64mm a inner diameter of 52,5mm and a thickness of 5,5mm. This gasket has 3 external cuts and has been...
The item on this product page is a OEM/Original La San Marco spare part. This is a sliding bushing used on the manual brewing groups, so not the leva brewing groups. The part reference number for this item is 205175. This sliding bush is made from brass. and has a diameter of 7x10mm.
This group gasket is used in various older La San Marco espresso machines. This gasket goes between the brewing group and the shower holder plate itself. There is no part reference number available for this item. This gasket is made from a universal type of carbo gasket material. The outer diameter is 51mm the inner diameter is 19mm and the thickness is...
The portafilter gasket on this page is a OEM/Original San Marco spare part. The part reference for this item is 109130 The gasket has been made form NBR. The outer diameter is 64mm, the inner diameter is 52,5mm and the thickness is 5,5mm. The gasket has on the outside external cuts. This gasket has been made in Italy. You can use this gasket on...
This item is a conical PTFE gasket. This gasket is used with various brewing groups of La San Marco. The part references for this item are 106151 and CMPTOR0020. This conical gasket has been made from PTFE. The outer diameter of this gasket is 10mm. the inner diameter is 4mm and the thickness is 6mm. This gasket has been made in Italy. This...
The item on this product page is a drain pipe used on various La San Marco espresso machines. This drain pipe is used on older models La San Marco brewing groups. The part reference numbers for this item are 205751 and CCMMIN2790. This drain tube has been made from brass. the fitting on the top is a 1/8” fitting. The Length of the tube...
On this product page you will find a bottomless portafilter suitable for the La San Marco brewing groups. La San Marco is the only commercial brand which uses the 3 ear configuration instead of the standard 2 ear configuration. This portafilter has been manufactured in Italy. The thickness of the ears on the bottomless portafilter are 7mm instead of the...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |