Espresso machine brewing groups can be have quite complex mechanisms, if you look at the mechanisms used on the E61 brewing groups. These brewing groups have various springs and valve components, these can also change per brand. So they are not always interchangeable. The easiest coffee machine brewing groups are the solenoid operated ones, these have the least components seen it is electrically operated.
On this category page you will find items such as group collectors, lever mechanisms, portafilter clamping rings, drain valves, infusion valves, upper sleeves. These items are used on a variety of brands such as Astoria, Faema, Casadio, La Cimbali, Wega, Rancilio and San Remo.
The stainless steel screw on this page is used to hold the filter holder coupling in it’s place on various La Cimbali espresso machines. The Cimbali part reference for this item is 593811000 and 593811010. This stainless steel coupling screw can be used on variety of la Cimbali models such as the La Cimbali M39, La Cimbali M39-GT, La Cimbali...
This item is a spring holder bushing used on various La Spaziale brewing groups. This item is a OEM/original La Spaziale spare part and has the part reference number 00365. This brass bushing has a outer diameter of 32mm and a internal diameter of 15mm. The height is on the outside rim 4mm and the inside it is 8mm. You can use this item on various,...
The item on this product page is a stainless steel grub screw, which is used on various domestic Nuova Simonelli espresso machines. The Nuova Simonelli part reference number for this item is 00300040 This grub screw is used in the back of the brewing group. The screw has a M6 thread and a length of 6mm. The item is made in Italy. It is used on various...
The item on this page is a drain hose fitting connector for a variety of Faema and Cimbali espresso machines. The Faema part reference number for this item is 937055010. This fitting is screwed onto the brewing group solenoid valve. The female thread is 1/8”. The side where the hose needs to placed has a diameter of 6mm. this item is made in Italy....
On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special. This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a...
The hex screw on this page is used on various La Cimbali espresso machine brewing groups. The part reference number for this item are 593815000 and 593815010 This head bolt keeps the portafilter coupling ring in place. The thread used on this nut is a male M6. The length of this screw is 29mm, the item has been made in Italy. Note: there are...
The fitting on this page is a plug which can be used on various Astoria and Wega espresso machines. The Astoria part reference of this 25789306 and the Wega part reference is WY25789306. This cap has a male thread and a outer diameter of 18mm. the item has been made in Italy. You can use this plug on the Wega Start, Wega Venere, Astoria Divina,...
The fitting cap on this page is a OEM/Original Astoria Wega spare part. The Astoria part reference for this item is 25789301 and the Wega part reference is WY25789301. This brass machined cap has a outer diameter of 18mm and has been made in Italy. You can use this cap on the Wega Start, Wega Venere, Astoria Brava, Astoria Rapallo, and the Astoria Sibilla.
The item on this product page is a filter holder coupling, this coupling is used on various Astoria CMA espresso machines. This item is a OEM/Original Astoria Spare part. The Astoria part reference numbers for this item are 25250, 4825250 and 53030. At some point it can occur that your portafilter coupling ring doesn’t function properly...
The cam holder on this product page is a OEM/Original Faema spare part, no not a NOS. but a modern one. The Faema part reference for this spare part is 4152135911 This spare part has been made from machined brass. But that’s not the final step. After that it has been polished, nickel plated and finally chrome plated. This item has been made in...
The item on this product page is called a flow restrictor. This item can be installed on the Faema E61 espresso machine as well on the E61 style of brewing groups used by Futuremat. This flow restrictor is made from brass. the hole in the middle of this restrictor has a diameter of 2mm.
The E61 drain valve sleeve on this page can be used with a variety of E61 style brewing groups. You can use this drain sleeve on Brasilia, Faema, Grimac, Bezzera, Wega, La Scala and Royal brewing groups. This drain sleeve has been made from machined brass. To reach the shiny chrome surface, the brass has been polished first, then nickel plated and at the...
the item on this product page is a OEM/original La Carimali shower holder. This item works the best in combination with part number 22.05049.NP. This item can be used on various La Carimali espresso machines. The part reference number for this item is 22.01225.NP This item has a outer diameter of 57,3mm. The inner diameter is 24mm. The height of the item...
the item on this product page is a OEM/Original La Carimali part. This item is a brewing group spray nozzle which is used in various Carimali brewing groups. The Carimali part reference number for this item is 22.05049.NP This brewing group spray nozzle has a outer diameter of 30mm. The hole diameter in the middle is 5mm. This item has been made in...
The item on this page is a OEM/original Bezzera spare part. This chrome plated clamping ring is used with a variety of domestic and commercial espresso machines. At some point it can occur that your portafilter coupling doesn’t work that great anymore with your brewing group. Then you can replace it with this new one. You can use this brewing...
The Vibiemme RACCCACOGR camme shaft holder on the manual Vibiemme espresso machines is also quite different then with a standard E61 style brewing group. This part is, similar to the drain sleeve, attached to the side of the brewing group with 2 M6 allen bolts. In the situation of the Vibiemme solenoid valve group in E61 style, this is a chrome...
The fitting on this page is a OEM/Original Elektra espresso machines spare parts. The Elektra part reference for this item is 00921021. This item has been made from machined brass, which has been nickel and chrome plated afterwards. The outer diameter of this cap is 30mm. You can use this cap on the Elektra Belle-Epoque, Elektra Classic, Elektra...
The filter holder coupling on this product page is a OEM/Original Elektra spare part. This filter holder coupling has the Elektra part references of 00006021 and 02151021. This portafilter coupling can be used on a variety of Elektra models such as the Elektra Classic, Elektra Kappa, Elektra Modern, Elektra Sixties and the Elektra Microcasa. But not...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |