×

SHOPPING FROM

Filter by

Price

3 188

Manufacturers

Coffee grinder part type

more... less

Type

more... less
Filter

Mazzer mini b electronic coffee grinder parts

Mazzer mini b electronic coffee grinder parts

There are 18 products.

The coffee grinder on this product page is the Mazzer Mini B electronic. This is one of the coffee grinders out of the range of Mazzer Mini. This model is mainly intended for domestic use, but you will see them pop up in bars or restaurants. For coffees which aren’t drunk that much such as decaf.

This coffee grinder doesn’t have a touchpanel like the Mazzer Mini A electronic There you can select a single or a double dose. Underneath this funnel you have the potentiometers for the dose adjustment. At this location you will also find the portafilter fork holder where you can lay your portafilter in while grinding. The grinding action will start once the portafilter hits the microswitch located at the end of the portafilter fork.

This coffee grinder uses flat grinding burrs with a clockwise turning direction. These burrs have a outer diameter of 64mm, a internal diameter of 37mm and a thickness of 8,4mm. they are mounted with 3 screws.

The Mazzer Mini B is only available as a single phase coffee grinder, in the option 110V and 220/240V. Seen this grinder is a single phase model, the motor then requires a motor start capacitor.

  • 0 1 2 3 4 (0)
    13,09 € Add to cart In Stock

    The bipolar switch on this product page can be used on various coffee grinder brands. Such as Cimbali and Mazzer. The part references of these models can be found in the extra info tab. This black bipolar switch has been rated up to 16A at 250V. The switch has a led indicator light when turned on. The mounting hole is 22x30mm. The switch has been made in...

  • 0 1 2 3 4 (0)
    3,46 € Add to cart In Stock

    This sticker is used on a variety of Mazzer coffee grinders. This sticker, which shows what the effects are of turning. If you turn the adjustment ring left is coarse and to the right this will be finer ground. So the space between the burrs to the left becomes bigger and to the right the distance between the burrs becomes smaller. This coarse fine...

  • 0 1 2 3 4 (0)
    27,27 € Add to cart In Stock

    How am I going to adjust the grind adjustment on my Mazzer coffee grinder? Well your burrs can be adjusted with the burr adjustment ring (SSJ0GHA02) this pin goes into the side of this ring in one of the 5 mounting holes. This specific adjustment pin screws into one of these 5 holes with a M5 thread. Note: if the ring doesn’t move because it is...

  • 0 1 2 3 4 (0)
    3,69 € Add to cart In Stock

    The sticker on this page basically says it all. It’s a Mazzer rotation sticker. The reason why they place this seen there are left and right turning motors. You do have also with a variety of brands where the motor spins the left way, like with Mazzer. But there are also brands which have a right turning motor. The blade design of the burrs for such...

  • 0 1 2 3 4 (0)
    4,53 € Add to cart In Stock

    On a variety of Mazzer coffee grinders you can find this grind adjustment spring. So, what does this spring do? Well, this spring supports the upper burr holder. So, when the burrs are set on the finest position, but you want to make them a bit coarser. You turn the grind setting adjustment ring outward. The springs will push the upper burr in its correct...

  • 0 1 2 3 4 (0)
    5,92 € Add to cart In Stock

    Almost every Mazzer coffee grinder has 4 individual feet to give it stability in harsh working environments. The feet are made up out of 2 parts. The feet itself. This is a rubber feet with a metal stud sticking out of it. This thread is a M5x0,75mm. The next part is the stainless steel cup which goes over the rubber feet. These feet are only sold per 4...

  • 0 1 2 3 4 (0)
    47,18 € Add to cart In Stock

    When you are grinding coffee and filling your portafilter with coffee, it will always happen that you spill coffee grounds. That is why there are with most coffee grinders coffee collecting trays. These are normally stainless steel trays, with some brands you see that those are made from a kind of plastic. For the Mazzer Mini they are made from polished...

  • 0 1 2 3 4 (0)
    27,60 € Add to cart In Stock

    On this page you will find a kit for the Mazzer Mini Electronic. This specific kit is installed between the grinder housing of the Mazzer Mini and the Funnel. The gasket is there to keep the wire mesh in place. The wire mesh has the dimensions of 36x32mm. this specific mesh is only suitable for 220/240V models of the Mazzer Mini Electronic A and Mazzer...

  • 0 1 2 3 4 (0)
    48,56 € Add to cart In Stock

    It is not uncommon that your hopper breaks or is virtually impossible to clean again. Especially when you have a bar or coffee shop, clear gear is key. Then the easiest solution is to buy a new hopper. On this page you find a original hopper made for the Mazzer mini. This hopper is suitable for the Mazzer mini doser, Mazzer Mini Electronic A and Mazzer...

  • 0 1 2 3 4 (0)
    46,75 € Add to cart In Stock

    A coffee bean hopper which breaks during moving, or just by crumbliness does happen. Especially when you are working in a busy coffee bar or café.  Or that your hopper is so filthy from all the oils of coffee that you can´t get it clean properly. Then the best solution would be to buy a new one. On this page you find a original hopper...

  • 0 1 2 3 4 (0)
    24,49 € Add to cart In Stock

    It is quite common that you lose or break your hopper lid of your coffee grinder. On this page you can find the hopper lid for the Mazzer mini. This lid is suitable for the models Mazzer mini electronic A, Mazzer mini electronic B and the Mazzer mini doser. The Mazzer mini hopper lid is made from plastic and has a diameter of 160mm. it is a original part...

  • 0 1 2 3 4 (0)
    4,16 € Add to cart In Stock

    Every Mazzer coffee grinder has this item installed. The AER gasket. This gasket is located between the coffee doser and the body or between the funnel and the body. The item has the part numbers S000GUA01 or S000GUA01/QQQ  You can find this item on the doser models of the Mazzer coffee grinder models: Mini, Lux, Super Jolly, Major, Kony,...

  • 0 1 2 3 4 (0)
    62,48 € Add to cart In Stock

    What does a portafilter holder fork actually do? Well when you lay your portafilter in the fork it supports itself while the ground coffee comes out of the Mazzer Mini. The portafilter fork holder you find on this page is only suitable for the Mazzer Mini Electronic A and the Mazzer Mini Electronic B. The specific fork holder is made out of stainless...

  • 0 1 2 3 4 (0)
    30,06 € Add to cart In Stock

    On this product page you will find a OEM/Original Mazzer mini spare part. The Mazzer part reference for this item is S00SGUA01 and S00SGUA01. This AER stop gasket and wire mesh are suitable for the 220V Mazzer mini models. The wire mesh is 36x32mm. these items have been made in Italy. This wire mesh and gasket can be used on the Mazzer Mini A electronic...

  • 0 1 2 3 4 (0)
    160,86 € Add to cart Shipment after 5 -10 working days

    On this page you will find the Mazzer burr adjustment ring. When you want a finer or coarser setting on your Mazzer burrs, you just need to turn this brass and threaded adjustment ring inward or outward. You can do this with the adjustment ring pin, with a m5 thread, which stick into the side of the burr adjustment ring(S00SPEA00) on various locations of...

  • 0 1 2 3 4 (0)
    187,30 € Add to cart available on request

    Most coffee grinders use a form of timer board or switch for grinding the coffee in the grinder. Some have digital displays, like the Mazzer Mini Electronic A. In the case of this grinder, the Mazzer Mini Electronic B, they have used potentiometers(S000POT01). But these potentiometers do need to transform the signal. Therefore they have installed a timer...

  • 0 1 2 3 4 (0)
    64,57 € Add to cart Shipment after 4 - 8 working days

    If you start to notice that your coffee grinder has difficulties with grinding the coffee beans, the chance is big that the burrs need to be replaced. Even your Mazzer Mini coffee grinder can have this issue.  On this page you will find the grinding burrs for the Mazzer Mini. These burrs are suitable for multiple models for the Mazzer mini like The...

Showing 1 - 18 of 18 items
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

Cookie preferences

Functional cookies
No
Yes
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Cookie Provider Purpose Expiry
PHP_SESSIDbrooks-parts.comThe PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser.Session
PrestaShop-#brooks-parts.comThis is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop.480 hours
Advertising Cookies
No
Yes
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
No
Yes
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.
Performance cookies
No
Yes
These are used to improve the browsing experience and optimize the operation of the shop.
Other cookies
No
Yes
These are cookies without a clear purpose or those that we are still in the process of classifying.