×

SHOPPING FROM

Filter by

Price

3 314

Manufacturers

Coffee grinder part type

more... less

Type

more... less
Filter

Mazzer Major electronic coffee grinder parts

Mazzer Major electronic coffee grinder parts

There are 18 products.

The Mazzer major espresso machine is one of the commercial grade coffee grinders the Mazzer company builds.  This specific model is the electronic “Elettronico” version of the Mazzer Major. This means that this model isn’t fitted with a storage doser on the front off the coffee grinder, but that this is a “On Demand” coffee grinder.

The Mazzer Major electronic is made in a variety of configurations, going from 100-115V up to 220-240V mostly in in single phase. Which means that you require a start capacitor for the motor, in comparison to the 3 phase motors where you won’t need that.

On top off the coffee grinder the you have a big transparent hopper. From there the coffee beans are fed towards the grinding burrs. The burrs used on the Electronic version are flat ones with a outer diameter of 83mm and a inner diameter of 49mm. from there the grounded coffee goes towards the wire mesh filter towards the funnel on the front of the coffee grinder.

On this funnel there is a touchpanel installed, on this touchpanel you have 2 pre-set (which can be adjusted) dose settings. One for a single and one for a double coffee dose. These doses are set based on a internal timer. At the back of the grinder there is a internal fan installed to cool the coffee grinder/burrs on the inside of the grinder.

If you are not sure which components you need for your Mazzer Major Elettronico, don’t hesitate to contact us and help you out.

  • 0 1 2 3 4 (0)
    3,46 € Add to cart In Stock

    This sticker is used on a variety of Mazzer coffee grinders. This sticker, which shows what the effects are of turning. If you turn the adjustment ring left is coarse and to the right this will be finer ground. So the space between the burrs to the left becomes bigger and to the right the distance between the burrs becomes smaller. This coarse fine...

  • 0 1 2 3 4 (0)
    27,27 € Add to cart In Stock

    How am I going to adjust the grind adjustment on my Mazzer coffee grinder? Well your burrs can be adjusted with the burr adjustment ring (SSJ0GHA02) this pin goes into the side of this ring in one of the 5 mounting holes. This specific adjustment pin screws into one of these 5 holes with a M5 thread. Note: if the ring doesn’t move because it is...

  • 0 1 2 3 4 (0)
    3,69 € Add to cart In Stock

    The sticker on this page basically says it all. It’s a Mazzer rotation sticker. The reason why they place this seen there are left and right turning motors. You do have also with a variety of brands where the motor spins the left way, like with Mazzer. But there are also brands which have a right turning motor. The blade design of the burrs for such...

  • 0 1 2 3 4 (0)
    4,53 € Add to cart In Stock

    On a variety of Mazzer coffee grinders you can find this grind adjustment spring. So, what does this spring do? Well, this spring supports the upper burr holder. So, when the burrs are set on the finest position, but you want to make them a bit coarser. You turn the grind setting adjustment ring outward. The springs will push the upper burr in its correct...

  • 0 1 2 3 4 (0)
    5,92 € Add to cart In Stock

    Almost every Mazzer coffee grinder has 4 individual feet to give it stability in harsh working environments. The feet are made up out of 2 parts. The feet itself. This is a rubber feet with a metal stud sticking out of it. This thread is a M5x0,75mm. The next part is the stainless steel cup which goes over the rubber feet. These feet are only sold per 4...

  • 0 1 2 3 4 (0)
    49,54 € Add to cart In Stock

    The switch on this page is a switch used in a variety of Mazzer coffee grinders. The Mazzer part reference for this switch is S000INA13. This selector switch has been made by the Italian company Bremas. The Bremas part references are CA0170002 and CA0170002V. This Bremas switch is rated up to 20A at 690V. The switch has 2 positions 0 and 1. The selector...

  • 0 1 2 3 4 (0)
    18,65 € Add to cart In Stock

    The capacitor on this page is a 20µF model. This model is manufactured by the Italian company Ducati Energia. The part reference for this item is 41610.2564. This capacitor can be found on a variety of coffee grinders such as Vibiemme, Mazzer, Fiorenzato C.s. and Macap. This capacitor produces 20µF at 450V 50-60Hz. The max and minimum...

  • 0 1 2 3 4 (0)
    4,16 € Add to cart In Stock

    Every Mazzer coffee grinder has this item installed. The AER gasket. This gasket is located between the coffee doser and the body or between the funnel and the body. The item has the part numbers S000GUA01 or S000GUA01/QQQ  You can find this item on the doser models of the Mazzer coffee grinder models: Mini, Lux, Super Jolly, Major, Kony,...

  • 0 1 2 3 4 (0)
    14,60 € Add to cart In Stock

    The item on this product page is a hopper lid, this item is a OEM/original Mazzer spare part. This unit is used on various coffee grinders of Mazzer and Astoria. The Mazzer part references numbers for this item are S000COD01, S000COD01/AQQ and SMI0COD01. The Astoria part reference number is 28053. This hopper lid is made from a black plastic and has a...

  • 0 1 2 3 4 (0)
    82,66 € Add to cart Shipment after 5 -10 working days

    The coffee collecting tray on this page is used on a variety of Mazzer coffee grinders. This item is a OEM/Original Mazzer spare part. The Mazzer part references for this item are SMJ0PIB02 and SSJ0PIB02. This coffee collecting tray has been made from pressed stainless steel. The tray has been made in Italy. You can use this stainless-steel tray on the...

  • 0 1 2 3 4 (0)
    110,76 € Add to cart Shipment after 5 -10 working days

    The coffee hopper on this page is a OEM/Original Mazzer coffee grinder spare part. This hopper can be used on the Electronic models as well as on the Doser models. The item has the Mazzer part references of S000CAE03, S00SCAE03 and S00SCAE07. This coffee hopper is complete. The hopper, lid and the connector for installation on the Mazzer coffee...

  • 0 1 2 3 4 (0)
    192,86 € Add to cart Shipment after 5 -10 working days

    The grinder adjustment ring on this product page can be used on a variety of Mazzer coffee grinders. This item is a OEM/Original spare part. The part reference is SMJ0GHA04 and SRO0GHA01  This adjustment ring has been made from casted and machined brass which has been nickel and chrome plated. With this adjustment ring you can set the distance...

  • 0 1 2 3 4 (0)
    51,29 € Add to cart Shipment after 4 - 8 working days

    The item on this product page is a OEM/Original Mazzer spare part. This item is a portafilter filter holder fork. The Mazzer part references for this item are S000FOB13, S000FOB13/QQQ and SMJ0FOB13. This stainless steel portafilter holder has a length of 66mm. The item has been made in Italy. This portafilter fork holder can only be used on the...

  • 0 1 2 3 4 (0)
    73,19 € Add to cart Shipment after 5 -10 working days

    The axial fan on this page is used on various Mazzer coffee grinders. The Mazzer part references for this item are S00SVEB01 and S00SVEB03. This axial fan is the EBM 612NGH. This fan is a 12Vdc 2,6W and runs at 5600rpdm. The outer dimensions are 60x60mm and the thickness is 25mm. This fan has been made in china. You can use this axial fan on the...

  • 0 1 2 3 4 (0)
    102,41 € Add to cart Shipment after 4 - 8 working days

    At some point in the life of your Mazzer Major you need to replace the burrs of your coffee grinder. There are after market models available from Italy, but you can also go for a original set off burrs. The Burrs for the Mazzer Major on this page are original ones. They are suitable for the Mazzer Major Doser and for the Mazzer Major Electronic. The...

  • 0 1 2 3 4 (0)
    184,51 € Add to cart Shipment after 4 - 8 working days

    The electrical part on this page is a OEM/Original Mazzer spare part. This item is used on various Mazzer coffee grinders. The Mazzer part references for this item are S000SCT06, S000SCT06/AQQ and S000SCT06-A. This timer board is suitable in the 220/240V application. The board itself is 100x74mm and has been made in Italy. You can only use this...

  • 0 1 2 3 4 (0)
    271,90 € Add to cart Shipment after 4 - 8 working days

    The commercial Electronic coffee grinders Made by Mazzer are controlled with a keypad which is located on top of the dosing funnel. This circuit board has the 3 push buttons and the electronic display on it. This specific model of circuit board is used with the coffee grinders: Mazzer Super Jolly Electronic, Mazzer Major Electronic, Mazzer Kony...

  • 0 1 2 3 4 (0)
    313,92 € Add to cart Shipment after 4 - 8 working days

    This diaphragm is used in a variety of Mazzer coffee grinders. This diaphragm does only include the metal ring, and the diaphragm, so not the push button board with display(S000SPU03). But this item can be found on a variety of coffee grinders made by Mazzer, solely the electronic ones not the doser grinders. You will find it on the Mazzer Super Jolly...

Showing 1 - 18 of 18 items
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

Cookie preferences

Functional cookies
No
Yes
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Cookie Provider Purpose Expiry
PHP_SESSIDbrooks-parts.comThe PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser.Session
PrestaShop-#brooks-parts.comThis is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop.480 hours
Advertising Cookies
No
Yes
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
No
Yes
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.
Performance cookies
No
Yes
These are used to improve the browsing experience and optimize the operation of the shop.
Other cookies
No
Yes
These are cookies without a clear purpose or those that we are still in the process of classifying.