On this category page you will find a wide selection of components which can be used on La Cimbali espresso machine boilers. The boilers used on La Cimbali espresso machines are open on one side of the boiler. So you will have a flange which needs to be sealed of with a boiler gasket. This side of the flange also houses the heating element.
In some cases you will also find the water level probe on the side of the boiler, this is not always the case. These are for instance with the Cimbali m39 installed on top of the boiler. The level probe in the flange is curved, in comparison to the top one which is straight.
On top of the boiler you will find other components like the safety valve, this valve can be installed vertically or horizontally. But will always have a rubber cover over it for the water.
If you can’t find the boiler components for your La Cimbali M32, La Cimbali M21 Junior, La Cimbali M27 or La Cimbali M100. Don’t hesitate to contact us for any assistance.
On this page you will find a boiler gasket suitable for a variety of La Cimbali espresso machines. The La Cimbali part reference for this item is 401-331-010 The boiler gasket on this page has a outer diameter of 180mm a inner diameter of 140mm and a thickness of 3mm. There are in total 6 bolt holes in the gasket. This gasket has been made in Italy. You...
The heating element gasket on this page can be used in a variety of espresso machine models made by Casadio and Cimbali. The Casadio part number is 401194010 and the Cimbali part number is 401-194-000. This gasket has been made from AFM34 by Victor Reinz. This gasket has a outer diameter of 58mm a inner diameter of 50 mm and a thickness of 2mm. The...
On this page you will find a rubber like sleeve. This rubber like sleeve is a safety valve protection sleeve. This sleeve slides over a safety valve. When there is a over pressure and steam and water are coming out off the safety valve. This sleeve will catch it and with the side connection the water will flow to the drain. This item doesn’t come...
On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE....
This type of anti vacuum valve is one of the most common valves around. This valve is suitable for a variety of espresso machine brands like Casadio, La Carimali, San Marco, San Remo, La Cimbali, Grimac, La Spaziale and so on. This anti vacuum valve has a male ¼”BSP-G thread. The body of this anti depression valve has been made out of...
The anti-vacuum valve on this page can be used on various espresso machine models of the brand San Remo. The anti vacuum valve has the San Remo part reference of 10652040A This anti vacuum valve has been made from stainless steel. The thread used is a male ¼” BSP-G thread. This stainless steel anti vacuum valve has been made in Italy...
The boiler safety valve on this page can be used on various La Cimbali espresso machines. This valve has a male ¼” BSP-G thread. It has been calibrated at a pressure of 1,8. This valve is a adjustable model. Inside the valve is a FKM seal and a stainless-steel spring. This valve is not certified. Made in Italy You can use this valve on the...
The level probe on this page is made by the Italian company Gicar. This level probe is used in a variety of espresso machines such as San Remo, Grimac and Astoria. The Astoria reference is 20258, the Grimac reference is GR212 and the San Remo part reference is 10112042. The Gicar part reference for this item is 9.0.81.02G The level probe shown on...
The boiler gasket on this page can be used on various older espresso machine model made by Cimbali. Item does not have a part reference number. The outer diameter of this gasket is 214mm the inner diameter is 200mm and the thickness is 3mm. This gasket can be used on the boilers on the La Cimbali M15, La Cimbali Rubino and the La Cimbali Gran luce.
A Anti vacuum valve is used to prevent that the pressure switch is kicked in too early when heating up. This anti vacuum valve has a male screw thread of ¼” BSP. A anti vacuum valve exists out of multiple components. The body with the threads, in this case made from stainless steel. The plunger, made from brass. This plunger has also the...
The boiler safety valve shown on this page can mainly be found on La Pavoni espresso machine boilers. The La Pavoni part reference for this item is 395221G This boiler safety valve has a male 3/8” BSP-G thread. The pre-set pressure is 1,8 bar and nonadjustable. The seal used is a FKM seal, when opened the steam outlet is 872 L/M. This valve is CE...
On this page you will find a plastic straight fitting. This fitting is used as a boiler fitting with the La Cimbali group with Cimbali, Casadio and Faema espresso machines. Part number for the Faema part 532601000, the Cimbali one 532-601-000 and the one from Casadio 532601000. The white plastic end fitting has a variable diameter from 12mm up to...
On this product page you will find a level probe for various La Cimbali and Faema espresso machine models. The level probes used on La Cimbali espresso machine boilers are different then most. The Cimbali part number for this item is 913-786-010 and for Faema the part number is 913786010. The level probe itself has a male fitting of 1/8”...
The item on this page is a PTFE heating element gasket, which is used on various espresso machine brands such as Casadio, San Remo, Vibiemme, Grimac , Brasilia and Astoria. The part reference numbers for this heating element gasket can be found in the extra info tab. As mentioned before this gasket has been made from PTFE. The outer diameter is 53mm, the...
The level probe on this page is used on various La Cimbali espresso machine models. This level probe is used the flange of the boiler instead on the top of the boiler. The part references can be found in the extra info tab. The level probe itself has been made from stainless steel. There is a PTFE insulator and a brass boiler fitting. This is a male...
The anti-vacuum valve on this page is used on various espresso machine models of the La Cimbali group. This anti depression valve has a variety of part references, these can be found in the extra info tab. This anti vacuum valve has been made from stainless steel. There is also a small cup with it, this is made from brass. The anti-vacuum valve has...
The item on this page is used to fix a rubber sleeve. This rubber sleeve is used on various espresso machines of the La Cimbali group. With this screw you prevent that the rubber sleeve accidentally comes off. This item can be used with a variety off brands of the Cimbali group. Like with the Casadio Dafne, Casadio Dieci, Casadio Dodici. But also with...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |