Every traditional espresso machine has a main water boiler, in some modern cases they also have a brewing group boiler. This is in both circumstances the case with espresso machines of the brand Vibiemme.
On this page you can find boiler components for commercial and domestic Vibiemme espresso machines. This goes from complete boilers for the VBM Domobar, to boiler flanges. But also the boiler gaskets to seal the flanges. These boilers can be found on espresso machine models such as the Vibiemme Replica, Vibiemme Cubo, VBM Dosaplus and the Vibiemme Silver.
But also spare Vibiemme parts like tubing, safety valves, fittings and anti vacuum valves can be found on this page.
Parts like heating elements and thermostats can be found on their own pages in this parts overview.
This brass casted boiler fitting is used on the bottom side of the heat exchanger (HX) of the espresso machine boiler. It attaches to the HX with a ½”male flat sided connection. The other ½”pipe connection is for the return pipe from the brewing group. The ¼”female thread on the bottom is for the injector tube. In...
The gasket shown on this product page can be used on various Vibiemme espresso machine boilers. The Vibiemme part reference for this item is GUARFL205T This boiler gasket has a outer diameter of 165mm a inner diameter of 150mm and a thickness of 3mm. This gasket has been made from PTFE. Made in Italy. You can use this boiler gasket on the Vibiemme...
The item on this product page is a crushable copper gasket. This gasket can be used with a variety of espresso machine brands such as Casadio, ECM Heidelberg, La Scala, Cimbali, Faema, Astoria, Nuova Simonelli, Pavoni, Wega and Rancilio. This crushable copper gasket has a outer diameter of 18mm a inner diameter of 14mm and a thickness of 2mm. This gasket...
This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
On this page you will find a boiler contact thermostat. This boiler contact thermostat is suitable for a variety of brands like Bezzera, la Marzocco and Vibiemme. But what does a boiler contact thermostat do. Well a contact thermostat is fitted against the object with it’s metal bottom side. When the temperature off a boiler becomes above the 130...
The P303T01 a more lightweight 3 phase pressure switch then the Asco P302/6 3 phase pressure switch. The difference is also that the P302/6 has a partially metal cover. And the P303T01 has a full plastic cover. This pressure switch has been used espresso machines like: Bianchi, Fiamma and Orchestrale.Nowadays these pressure switches are named Asco, in...
This pressure switch is the only pressure switch Parker builds for the espresso machine market, brands like Asco (Sirai) and Ma-Ter are a lot more well know for this application. But it doesn’t mean that they can’t be made by someone else. This Parker pressure switch is the model PS325-1C-SX (part numbers 870502 and 870500) is a 3 phase...
The top HX boiler fitting, a generic item you will find with a lot of espresso machine brands. This ranges from Vibiemme, Grimac, Pavoni, La Scala to Expobar, Brasilia and BFC. This specific item is a casted brass fitting. The side which is screwed into the HX is a ½”BSP-g and the side where the tube to the brewing group goes to is also a...
The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high. This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0...
On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...
On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE....
This type of anti vacuum valve is one of the most common valves around. This valve is suitable for a variety of espresso machine brands like Casadio, La Carimali, San Marco, San Remo, La Cimbali, Grimac, La Spaziale and so on. This anti vacuum valve has a male ¼”BSP-G thread. The body of this anti depression valve has been made out of...
The anti-vacuum valve on this page can be used on various espresso machine models of the brand San Remo. The anti vacuum valve has the San Remo part reference of 10652040A This anti vacuum valve has been made from stainless steel. The thread used is a male ¼” BSP-G thread. This stainless steel anti vacuum valve has been made in Italy...
The item on this product page is a anti vacuum valve. This valve can be used on espresso machine brands such as ECM Heidelberg and Isomac. But basically on every espresso machine which has a ¼” connection it can be installed. The ECM Heidelberg part reference number is P2561 and the Isomac part reference number is IS000263. This...
Probably the most used pressure switch used on the Asco P302/6 a 3 phase pressure switch. This pressure switch has been used espresso machines like: La Marzocco, Faema, Cimbali, Astoria, Wega, Nuova Simonelli, La Spaziale, San Remo and so on.The brand Asco used to be the company Sirai, since a while this name has changed but the product remains the same....
The item on this product page is a OEM/Original VBM drain cup. This drain cup can be used on various Vibiemme espresso machines. The Vibiemme part reference number for this item is MATECSCSCEVOL. This drain cup has on the bottom of the cup a male thread, this is used to fix it to the frame of the espresso machine. On the side is a male hose connection....
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |