Vibiemme E61 style solenoid
Vibiemme E61 style solenoid
There are 25 products.This Vibiemme brewing group is based on the original Faema E61 brewing group, but is completely different. This is a solenoid operated brewing group, so on the bottom of the group you will find a 3 way parker solenoid valve. This solenoid valve does have the cabling already fixed to it.
In the top section(drain sleeve) of the brewing group you will find the nozzle/jet and the stainless steel water filter. These are all static parts, so no moving parts like with the E61 manual groups.
The portafilter gasket used on this solenoid operated brewing group has a outer diameter of 73mm and a inner diameter of 57mm. The standard Vibiemme brewing groups can be used on this brewing group.
You can find this brewing group on espresso machine models such as the Vibiemme Chimaera, Vibiemme Cubo, Vibiemme Domombar, Vibiemme Dosaplus, Vibiemme Merucry, Vibiemme Replica and the Vibiemme Revolution.
Portafilter gasket 73x57x9mm
(0) Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these...
Brewing group gigleur 0.6mm
(0) This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...
Filterholder suplement gasket 73x59x0.8mm
(0) The paper shim on this page is one of the most widely used paper shim. You can use this type with a wide selection of espresso machine brewing groups. What are the dimensions of this paper shim? They have a outer diameter of 73mm, a inner diameter of 59mm and a thickness of 0,8mm. What does a paper shim do? Brewing group locking mechanisms wear due to...
Stainless steel filter 8.6x22.5mm
(0) The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega. This stainless steel water filter has a outer diameter of 8,5mm...
Gasket PTFE 22x16x2mm
(0) This a universal Polytetrafluoroethylene (PTFE) gasket with 22x16x2mm. The gasket is used on a variety of espresso machine components. This type of gasket found boilers, brewing group and valve assemblies. The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera,...
E61 style group spout breaker
(0) On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....
E61 shower screen old style 60mm
(0) This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070. The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm...
PTFE gasket 35x30x2mm
(0) The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...
Filterholder gasket 72.5x57x8 mm
(0) The portafilter gasket on this product page can be used with a wide selection of brands. This portafilter gasket can be used on Brasilia, San Remo, la Scala, Bezzera, Faema, Vibiemme and Pavoni espresso machines. This gasket has been made from NBR. The outer diameter is 72,5mm, the inner diameter is 57mm and the thickness is 8mm. This gasket has been...
O ring gasket 6.07x1.78mm Solenoid valve
(0) This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...
PTFE gasket 25.4x21.2x5.5mm
(0) This flat Polytetrafluoroethylene (PTFE) gasket 25.5x21x5mm is used on Vibiemme (GUARCASUTEPI) espresso machine brewing groups. As well in the manual lever brewing group as well for the solenoid group. This part seals off the bottom off the upper sleeve in the brewing group. If you are not sure if this item will fit your Vibiemme Domobar, Vibiemme...
Locking group gasket
(0) If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega,...
PTFE gasket 26x21x2mm
(0) This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
Vibiemme upper sleeve
(0) This Vibiemme RACCCASUTEPI chrome plated drain sleeve is unique for e E61 style brewing group. Vibiemme is the only espresso machine manufacturer who uses this principle. This is being used for the Lever as well for the Solenoid brewing group. Instead of the screw in drain sleeve, as being used by brands like Faema, Bezzera, La Pavoni, La Scala and...
Shower with net and rays caulked 60mm
(0) The shower screen on this page is one of the most commonly espresso machine shower screens used in commercial espresso machines. For instance on all E61 types of brewing groups. This specific shower screen has been made by the Italian company IMS Filtri. The IMS part reference for this item is IMSDR306. Note: this is not a competition shower screen. This...
Portafilter gasket 73X57X8.5mm
(0) This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac. Of this...
IMS E61 style shower screen
(0) This shower screen style is one of the most used shower screens with espresso machines. It can be for instance used on the Faema E61 and E61 style brewing groups. This specific model of shower screen is made by IMS Filtri in Italy. But this is not a standard version, it is from their Competition series shower screens. This specific model is the E61200IM....
Vibiemme single coffee portafilter original
(0) The single portafilter shown on this product page is a OEM/Original Vibiemme espresso machine spare part. The Vibiemme part reference for this item is ASPORTN1TBMON. This single portafilter has a open spout, this make it easier to clean your portafilter. The ear orientation is 90 degree. The thickness of these ears is 5,5mm. The portafilter comes with a...
