On the Astoria Argenta espresso machine you will find the standard brewing group of Astoria CMA, this is a solenoid valve operated brewing group.
This brewing group is attached to boiler flange with 4 bolts. In the back of this flange a tube can be screwed into to get the water from the heat exchanger (HX) tube.
With this group head you have the main body, this is where the solenoid valve and wire mesh filter are installed. And the other part is the portafilter assembly. This section is made out of the portafilter coupling ring, portafilter gasket, shower holder and the shower screen. On this group head you have a portafilter gasket with a outer diameter of 72mm and a inner diameter of 56mm.
On this brewing group the standard model of portafilter is used, which has a ear orientation of 45 degree and ear thickness of 6mm.You can not use the smaller model of portafilter on this group head.
The shower holder diffuser on this page is used for a couple of models produced by the Astoria CMA group. For the Astoria you can find this item on the Astoria Argenta, Astoria Brava, Astoria Denise, Astoria Dora, Astoria Lisa and Astoria Pratic. For the Wega espresso machines you can find them on the Wega Venere and the Wega Concept 56. This item...
The shower screen on this page is made by the Italian company IMS Filtri, no this is not a competition shower. But they also make standard shower screens. This shower screen can be used on a variety of brewing groups. Like on the ones of Reneka, Carimali, Bezzera, Grimac, Astoria, Wega and Elektra. The external diameter of this shower screen is 51,5mm...
The paper shim on this page is one of the most widely used paper shim. You can use this type with a wide selection of espresso machine brewing groups. What are the dimensions of this paper shim? They have a outer diameter of 73mm, a inner diameter of 59mm and a thickness of 0,8mm. What does a paper shim do? Brewing group locking mechanisms wear due to...
On this page you will find one of the most used brewing group solenoid valves in espresso machines. But this is instead of a 230V version a 115V version. This solenoid valve has been manufactured by the company Parker. The Parker parts reference for this solenoid valve is 393106J or 393111J This 3-way solenoid valve is a model with a flat flange, this...
The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve. Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...
The item on this page is a 3 way solenoid valve made by the brand Lucifer. This item is slightly different, seen it’s not a standard 220/230V model. But it is a 110V model. This 3 way valve can be used on a variety of espresso machine brands such as Casadio, Brugnetti, San Marco, La Scala, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli, La...
Most of the pump driven espresso machines use a 3 way solenoid valve the control the brewing process. On this page you will find a ODE solenoid valve made by the Italian company ODE. The solenoid valve number is: 31A1AR15-VORV This specific model is a flanged model. So it is bolted against a flat machined surface with 4 allen bolts. These surfaces are...
On this page you will find a 110V 3 way solenoid valve made by the Italian manufacturer ODE. This specific model 31A1AR15 is made in Italy. This model is a flange solenoid valve. So it is bolted with 4 Allen bolts against a flat surface and is sealed of by 2 o rings at the bottom. In the brass body of the solenoid valve, you will find a orifice of 1,5mm....
The solenoid valve on this page is slightly different then the flanged 3 way solenoid valve. Instead of the traditional brass solenoid valve flange is this one made from stainless steel. This parker 3 way solenoid valve is mainly used as a brewing group solenoid valve. The Parker part number for this item is 3019F1GRG7XS03XS6 and 131FSG100 As mentioned...
The portafilter gasket on this page is a alternative to the original portafilter gaskets made by the Astoria CMA group. The design of this portafilter gasket is similar to the original and is also made in Italy. The corresponding Astoria part number is 12217 and the one of Wega is WY12217 The outer diameter of this portafilter gasket is 72mm,...
The portafilter on this product page is suitable for a broad selection of Astoria espresso machine models. The Astoria part reference for this item is 27311051 and 8327311051R This double portafilter has a open spout, this spout has a thread of 3/8” BSP-G. The orientation of the ears is 45 degree. The portafilter does have a ear...
The single portafilter shown on this product page is a OEM/Original Astoria espresso machine spare part. The Astoria part reference for this item is 27311000. Note, this is the reference for the body. This single portafilter has a open spout, this make it easier to clean your portafilter. The ear orientation is 45 degree. The thickness of these ears is...
The single portafilter on this product page is suitable for a broad selection of Astoria espresso machine models. The Astoria part reference for this item is 27311050 and 8327311050R This single portafilter has a open spout, this spout has a thread of 3/8” BSP-G. The orientation of the ears is 45 degree. The portafilter does have a ear...
The double portafilter shown on this product page is a OEM/Original Astoria espresso machine spare part. The Astoria part reference for this item is 27311051 and 8327311051R. Note, this is the reference for the body 27311000. This single portafilter has a open spout, this make it easier to clean your portafilter. The ear orientation is 45 degree....
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |