Brasilia - Gradisca, portofino steam/water tap
Brasilia - Gradisca, portofino steam/water tap
There are 15 products.Brasilia Gradisca, portofino steam and water tap
Crushable copper washer 23x17x3mm
(0) The crushable copper gasket on this page can be used with various applications on Brasilia espresso machines. For instance, on sealing off steam and water tubes and as a gasket on various boiler fitting applications. The Brasilia part reference for this item is 01386.0.00.02 This copper gasket has a outer diameter of 23mm a inner diameter of...
PTFE gasket 20x17x2mm
(0) This flat PTFE gasket shown on this page is used on a variety of espresso machine brands in the steam and water valves. This gasket can be used on the San Remo, Royal, Brasilia and ECM Heidelberg espresso machines. This flat PTFE gasket has a outer diameter of 20mm a inner diameter of 17mm and a thickness of 2mm. This gasket has been manufactured in...
Water stem complete
(0) The item on this page is a complete water stem. This item can be used on variety of espresso machines such as San Remo, Vibiemme, La Scala, Grimac, Pavoni, Rocket and Gaggia. This water stem has a 1/8” BSP-G female thread. The water stem does have the filter membrane inside, this can be replaced. The item has been made in Italy. This water stem...
o ring gasket 7,2X1,9mm nbr
(0) On this page you will find the o ring with the cord diameter of 1,9mm and a internal diameter of 7,2mm. This specific o ring is used with a variety of applications in expresso machines. For instance, with Expobar in the water inlet valve. For Faema in the cappuccinatore. With Vibiemme, La Scala, Fiamma, Grimac, Brasilia, ECM Heidelberg and La Carimali in...
Faema E61 valve gasket 13x4x4mm
(0) The valve gasket on this page can be used on numerous of espresso machine brands such as Vibiemme, Wega, La Scala, Faema, La Pavoni, Brasilia and Grimac. This gasket in mainly used in the steam and water valves as well as in the water inlet valves. But the best example is in the E61(type) of brewing groups. The part reference list can be found in the...
Tap joint spring 12x15mm
(0) The steam pipe spring on this page is suitable for a variety of espresso machine brands, it’s also a universal item. This spring make sure that you can leave your steam tube in a fixed position. If there is no spring, it will fall back to the lowest point. This spring has a external diameter of 12mm and a overall length of 15mm and is made from...
Steamtube anti scorch clip
(0) The steam tube grip on this page is suitable for steam tubes of 10mm in diameter. If you click this steam tube around your stainless steel or chrome plated steam tube you will never have the issue of burning your hands on the tube. This rubber grip has part references to Brasilia espresso machines 11972.0.00.02 and San Remo espresso machines with...
Brasilia steam tap washer
(0) The item on this product page is a steam and water valve elastic washer, used on various Brasilia espresso machines. The Brasilia part reference number for this item 01286.0.00.03 These washers are used in a pair in combination with the articulating valve screw, which is used on the steam and water valves. You can use these washers on the Brasilia...
Brasilia rubber valve stud
(0) The valve axle on this page is suitable for a variety of Brasilia espresso machine models. This steam and water valve shaft has the Brasilia part reference of 12046.4.00.09 This steam and water valve shaft has a overall length of 100mm and comes with a sealing gasket already installed. You can use this valve not in combination with the ceramic valves....
Tap joint spring guide
(0) This steam pipe bushing is a important element in the sealing and functioning of a steam and water valve. This bushing is pushed down on one side with a spring, this bushing has on the other side a hollow shape so that the ball of the steam and water valve can slide smoothly over the brass. This brass bushing has multiple dimensions. The external...
Chromed steam stem 4 holes dia 1,5mm
(0) After a while you do need to replace your steam nozzle, this can be because of various reasons. This specific model is made from brass and then chrome plated. The interior thread, which threads onto the wand, is a 1/8”BSP-G. The steam nozzle has 4 holes each of 1,5mm in diameter. To make it easier to clean this steam tip, they have made a flat...
Brasilia tab spring
(0) The compression spring on this page is used on various models of the Brasilia espresso machine brand. This specific spring is used with the rubber steam and water valves. The part reference number for this item is 10962.0.00.03 This compression spring is made from Stainless steel. The outer diameter is 10,5mm and the length is 27mm. This steam and...
Brasilia valve washer 10.7x8.2x2mm
(0) The item on this page is a steam and water valve washer, used on various Brasilia espresso machines. The Brasilia part reference number for this item is 12153.0.00.03. This washer is made from machined brass. the outer diameter is 10,7mm, the inner diameter is 8,2mm and the thickness is 2mm. this washer is made in Italy. You can use this brass washer on...
Steam water valve fitting 3/8m 1/8m
(0) The item on this product page is a fitting used on various steam and water valves. You can use this fitting on Brasilia and Marzocco espresso machines. The Brasilia part references are 07202.0.00.04 and 07202.0.10.04, for Marzocco it is L053/2. This fitting is made from brass and has been nickel plated (in some cases they are just brass). On...
Brasilia steam tap screw
(0) The item on this product page is a steam and water valve screw, used on various Brasilia espresso machines. The Brasilia part reference number for this item 00107.4.00.04 This articulating valve screw is used in combination with the spring washers and the conical PTFE gaskets to seal off the valve. This item has been made in Italy. You can use...
