The espresso machine brewing group used on the Cimbali M39 Dosatron and the Cimbali M39 Classic are from the standard Cimbali brewing group. The Cimbali brewing groups have a heat exchanger installed at the back of the group, which is placed inside the boiler of the espresso machine. This brewing group is a solenoid valve operated brewing group, this solenoid valve is a 3 way valve which is located at the side of the brewing group.
The portafilter itself is held in place with a removable portafilter holder coupling, this coupling is interchangeable with most La Cimbali espresso machines. You can use any Cimbali portafilter which is used on Cimbali group heads. The portafilter gasket on this Cimbali M39 group head has a outer diameter of 71mm and a inner diameter of 56mm.
If you are not sure which part you need for your brewing group of your Cimbali M39 espresso machine, don’t hesitate to contact us.
The conical portafilter gasket on this page is suitable for a variety of espresso machine brewing groups. Such as the ones for Casadio, Cimbali, Nuova Simonelli and Victoria Arduino. The matching part numbers for it are Casadio 401261010, Cimbali 401-261-010, Nuova Simonelli 40200004 and Victoria Arduino 40200004. This portafilter gasket has a...
On this product page you will find a paper seal for a portafilter gasket. This model of paper shim can be used on a variety of brands of espresso machines such as Casadio, Cimbali, Astoria, Nuova Simonelli, Wega and Brasilia. What does a paper shim do? The brewing group ring and portafilter ears wear down over time, to compensate this there are paper...
On this product page you will find a 3 way solenoid valve made by the company Lucifer, this part of the company Parker. This solenoid valve can be used on various espresso machine brands such as Cimbali and Faema. The corresponding part references would be for Faema 533892300R and 533892300. For Cimbali 533-892-300R and 533-892-300. This solenoid valve...
On this page you will find a 3 way solenoid valve made by the company Parker. This specific model is a 24V AC 3 way valve. Which can be used on some Faema and San Marco brewing groups. The parker part number for this item is 393110J This solenoid valve is a flanged 3 way valve. The flange is sealed off with the 2 o rings at the bottom of the valve....
The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve. Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...
The o ring on this page is a green Viton o ring used in the most commonly used La Cimbali Brewing group. This gasket makes on multiple locations a seal between the 150mm/210mm HX tube and the brewing group head and the HX and the boiler flange. There are multiple Cimbali part numbers such as 401178002, 401-178-002, 401178012 and 401-178-012. This o...
The solenoid valve on this page is slightly different then the flanged 3 way solenoid valve. Instead of the traditional brass solenoid valve flange is this one made from stainless steel. This parker 3 way solenoid valve is mainly used as a brewing group solenoid valve. The Parker part number for this item is 3019F1GRG7XS03XS6 and 131FSG100 As mentioned...
The filterbasket on this page is made by IMS in Italy and is from their competition series filter baskets. The specific product number for this specific filter basket is B681TH24.5E. This single filterbasket can hold a capacity from 6 grams up to 9 in total. The outer dimension of this filter basket is 68mm and the body is 60mm. The ridge is externally...
At some point the portafilter coupling of your espresso machine will wear out, or the finish will go bad. That would be the time to replace it. This specific model is one used on various La Cimbali espresso machines. The parts reference numbers for this item are 457299017, 457-299-017, 457299027 and 457-299-027. This portafilter coupling is...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |