La Pavoni Part category

On this product page you will find a 57mm shower screen suitable for various espresso machine brands like Bezzera, Promac and Rancilio. This shower screen is made by IMS filtri, the IMS code is RADR152 This stainless steel shower screen has a external diameter of 57mm and a height of 3,7mm. The central hole for mounting the shower screen in the brewing...

The boiler safety valve shown on this page can be used on wide selection of espresso brands such as Brasilia, Wega, Astoria, Grimac, Cimbali, Faema, Marzocco and Carimali. The part references can be found on the extra info tab. This boiler safety valve has a male 3/8” BSP-G thread. The safety valve has been set at 1,8 bar, this is not adjustable. When the...

This brass valve fitting is one of the most used components for steam and water valves. You will find this item on a variety of brands such as Faema, Marzocco, La Scala, La Pavoni and Vibiemme. This brass fitting has in total 3 screw threads. 1 for fixing it to the valve body, 1 for fixing the valve to the machine and the other one for the valve knob....

This contact thermostat has a shut off temperature at 165 °celcius. In this case it is a manual espresso machine thermostat. That means that it needs to be pushed manually to reset.  With a automatic one it will reset itself. On the bottom of this thermostat is a M4 male screw thread. You can screw the thermostat into a boiler for instance. For...

This stainless steel spring 14x33mm is used in a variety of locations in a espresso machine. The most common location for this compression spring is in a Faema E61 brewing group of a E61 style brewing group. The spring seats inside the top trumpet and makes sure that the top brewing valve closes when the brewing process is stopped, and the lever has...

The solenoid valve on this page is a water inlet valve made by the company Parker, this valve has been manufactured in Italy. The parker part number is 397484 This solenoid valve has a inlet and outlet which have a ¼” BSP-G thread in the inside. The orifice in the middle of this valve has a diameter of 3mm and is sealed off with a FKM...

The P203T01 is also manufactured by the company Asco, in the past the name of these pressure switches was Sirai. This name change happened for all the products of Sirai. This Asco Pressure switch is a 2 pole instead of a 3 pole pressure switch. With a full plastic cover. This pressure switch has been used espresso machines like: La Pavoni, Rocket and La...

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...

The product on this page is a gigleur/nozzle for inside a brewing group. This type of nozzle can be used with brands from the Astoria CMA group. For Astoria the part number is 10300001 and for Wega the part number is WY10300001 This specific gigleur is made from brass and has a central hole of 0,7mm. The threads used are a M5 with a pitch of 1mm....

The item on this product page is a crushable copper gasket. This gasket can be used with a variety of espresso machine brands and applications. You can use this gasket with brands such as Cimbali, Faema, Vibiemme and Pavoni. The part reference for this item is for Faema 4701135891, for Pavoni 362000/362007/362075, for Vibiemme GUARTACHGR. This round...

On this product page you will find a brewing group water filter. This brewing group filter prevents that debris from the HX blocks the nozzles/gigleur. This type of filter is used in a variety of brewing groups. This water filter is made from stainless steel. The outer diameter of this filter is 14mm. the inner diameter is 10 mm and the height is 12mm....

Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...