La San Marco - solenoid valve group

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

On this product page you will find a portafilter gasket suitable for a variety of La San Marco brewing groups. The La San Marco part reference for this item is 109011. This gasket has been made from NBR. The filter holder gasket has a outer diameter of 64mm a inner diameter of 52,5mm and a thickness of 5,5mm. This gasket has 3 external cuts and has been...

The shower holder diffuser on this page is a OEM/Original La San Marco spare part. The San Marco part reference for this item is 206823  The shower diffuser plate on this page has an outer diameter of 54mm and a height of 12mm. The central hole is 5mm. This original La San Marco shower holder diffuser plate is used on the La San Marco 105.

On this page you will find one of the most used brewing group solenoid valves in espresso machines. But this is instead of a 230V version a 115V version. This solenoid valve has been manufactured by the company Parker. The Parker parts reference for this solenoid valve is 393106J or 393111J This 3-way solenoid valve is a model with a flat flange, this...

La San Marco PTFE HX gasket 34x27x2mmReturn to the  San Marco group parts overview

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

The gasket on this page is a group locking gasket used on various La San Marco espresso machine models. The La San Marco part reference for this item is 109070  This gasket is made from a fibre material. The length of the gasket is 95mm and the width is 45mm. there are 2 holes for threads and one for a supply tube. This gasket has been made in Italy...

The item on this page is a thermal tube for various La San Marco espresso machines. This thermal tube is a OEM/Original La San Marco spare part. The part references for this item are 507440 and BRSTA0050.  This thermal pipe has been made from copper and has a diameter of 50mm. On both sides is a ½” BSP-G thread. The overall length for...

Most of the pump driven espresso machines use a 3 way solenoid valve the control the brewing process. On this page you will find a ODE solenoid valve made by the Italian company ODE. The solenoid valve number is: 31A1AR15-VORV This specific model is a flanged model. So it is bolted against a flat machined surface with 4 allen bolts. These surfaces are...

The portafilter gasket shown on this page can be used on a variety of San Marco espresso machine brewing groups. But the traditional gaskets are made from NBR, but this model has been made from food graded Silicone. The Rancilio part reference for this model of portafilter gasket is 109011 and 109130  This blue silicone portafilter gasket has a...

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.  Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...