The steam and water valve system on the Nuova Simonelli Appia espresso machine is made out of 2 sections. The manual operated steam valve and the automatically controlled water valve.
The steam valve on the Nuova Simonelli Appia uses the “traditional” model of valve. This valve is operated by moving the handle vertically. To open and close the valve. The steam tube is a swivel model, with a compressing spring. So you can put the steam tube in any position without supporting it.
With the water tube you have a similar situation. Only this valve is solenoid valve operated. The water tube is, the same as the steam tube, a swivel joint which is under spring pressure. This makes it possible to leave it in a variety of positions without holding it into place.
The steam and water valve handle on this page is a Original/OEM Nuova Simonelli spare part. The part reference for this item is 05000815. This steam and water valve handle has been made in Italy. You can use this handle on the Nuova Simonelli Aurelia II, Nuova Simonelli Aurelia and the Nuova Simonelli Appia.
The item on this product page is a OEM/Original Nuova Simonelli and Victoria Arduino spare part. The Nuova Simonelli part reference for this item is 07300108 and 07300355. For Victoria Arduino the reference is 07300355 This steam and water valve tap fork has been made from casted brass and after that it has been machined. This item has been...
The o ring on this product page can be used on various espresso machine brands such as Nuova Simonelli, Victoria Arduino and La Spaziale. The part reference for Spaziale is 08289 and for Nuova Simonelli and Victoria Arduino it is 02280037. This o ring is made from EPDM. The cord diameter is 2mm and the inner diameter is 16mm. This o ring has been made in...
On this page you will find a brass gasket holder including a gasket for various Nuova Simonelli and Victoria Arduino espresso machines. The Nuova Simonelli part reference for this item is 98008004 and 07300034. For Victoria Arduino the part references are identical. This gasket holder is made from brass and has a gasket on the inside already installed....
The item on this product page is a OEM/Original Nuova Simonelli and Victoria Arduino spare part. The Nuova Simonelli part reference for this item is 07300354. For Victoria Arduino the part reference is identical 07300354. This steam and water valve body has been made from casted and machined brass. This valve body has been made in Italy. You will find...
The Steam stem on this product page can be used on various espresso machine brands such as Nuova Simonelli, Victoria Arduino and Rancilio. The steam stem has been made from stainless steel. this steam stem has a cylindrical shape. There are in total 4 holes for the steam. These holes have a diameter of 1,5mm.
The steam tube grip on this page is suitable for steam tubes of 10mm in diameter. If you click this steam tube around your stainless steel or chrome plated steam tube you will never have the issue of burning your hands on the tube. This rubber grip has part references to Brasilia espresso machines 11972.0.00.02 and San Remo espresso machines with...
The o ring on this page can be used on a variety of espresso machine brands with various applications. You can find this o ring with brands such as Faema, Nuova Simonelli, Pavoni, Victoria Arduino and Gaggia. This o ring has been made from silicone. The cord diameter is 1,78mm and the internal diameter is 3,89mm. This o ring has been made in Italy. This...
The compression spring on this page can be used with various models of Nuova Simonelli and Victoria Arduino. The Nuova Simonelli part reference is 08000005 and the Victoria Arduino part reference is 08000005 This stainless steel compression spring has a outer diameter of 11,5mm and a overall length of 25mm. This spring has been made in Italy....
The o ring on this product page can be used with a variety of espresso machine brands and in various applications. Such as in the brewing group, water and steam valve and in the water inlet valve. You can find this model of o ring with brands such as Nuova Simonelli, Victoria Arduino, San Marco, Faema, Aurora Brugnetti and Conti. This o ring has been...
The compression spring on this product page can be found with a variety of espresso machine brands. It is used for applications in the steam and water valve with brands such as Victoria Arduino, Nuova Simonelli, la Spazaiale, Elektra and San Remo. The Spaziale part reference is 07568, The San Remo reference is 10402043, For Carimali it is...
The steam valve on this page is suitable for a variety of Nuova Simonelli espresso machines. The Nuova Simonelli part reference for this item is 98006020. The valve is suitable for the left and right hand sides of the machine. This valve does not come with a handle assembly, just the complete valve and steam tube. The item has been made in Italy. You...
This product page shows a stainless steel steam tube which is suitable for various Nuova Simonelli and Victoria Arduino espresso machines. The Victoria Arduino part reference is 75006037 and the Nuova Simonelli part reference of this item is 75006037.1 This stainless steel steam tube has on the valve part a 3/8”BSP-G thread and on the...
The item on this product page is a steam and water valve tube attachment nut. This nut can be used on various Nuova Simonelli espresso machine models. The Nuova Simonelli part reference number for this item is 07300798. This steam and water tube attachment nut has a 3/8” BSP-G thread. The nut itself has a width of 22mm and a height of 26mm. The...
This valve shaft is a OEM/Original Nuova Simonelli spare part. The part reference of this item is 07300221. This stainless steel tab spring is made in Italy and can be used on the Nuova Simonelli models: Nuova Simonelli Aurelia, Nuova Simonelli Aurelia II, Nuova Simonelli Appia, Nuova Simonelli Premier and the Nuova Simonelli Mac models.
This steam pipe bushing is a important element in the sealing and functioning of a steam and water valve. This bushing is pushed down on one side with a spring, this bushing has on the other side a hollow shape so that the ball of the steam and water valve can slide smoothly over the brass. This brass bushing has multiple dimensions. The external...
Brass fittings used on espresso machines are generic items, seen they are used in quite a lot of coffee machines. This specific model is a nut with a 3/8” BSP-G thread with a height of 6mm. The wrench size used for this item is a 21. Which models use this 3/8” BSP-G nut.? Well you can find this nut with brands like: Gaggia, Saeco, Victoria...
The item on this product page is a OEM/Original Nuova Simonelli and Victoria Arduino spare part. The Nuova Simonelli part reference for this item is 07300110, this reference number is identical for Victoria Arduino. This brass fitting is a combination between a coupling and a spring holder. The thread used on this item is a 3/8” BSP-G thread. This...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |