This flat PTFE gasket shown on this page is used on a variety of espresso machine brands in the steam and water valves. This gasket can be used on the San Remo, Royal, Brasilia and ECM Heidelberg espresso machines. This flat PTFE gasket has a outer diameter of 20mm a inner diameter of 17mm and a thickness of 2mm. This gasket has been manufactured in...
The steam valve bushing on this page is used in one of the most common steam and water valves used. This item can be used with brands such as Marzocco, La Carimali, San Remo, La Scala, Faema, La Pavoni and BFC. Against this brass bushing seats a valve shaft spring. This bushing pushes against 2 o rings which seal off the steam valve shaft. This bushing...
This steam and water valve compression spring is one of the most used compression springs. You will find them with a variety of espresso machine brands such as Faema, Pavoni, La Scala, Vibiemme, la Marzocco and San Remo. The part references can be found in the extra info tab. This stainless-steel compression spring has a outer diameter of 10,5mm and a...
The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013. This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...
The o ring on this product page can be used on various espresso machine brands such as Nuova Simonelli, Victoria Arduino and La Spaziale. The part reference for Spaziale is 08289 and for Nuova Simonelli and Victoria Arduino it is 02280037. This o ring is made from EPDM. The cord diameter is 2mm and the inner diameter is 16mm. This o ring has been made in...
The item on this page is a brass low nut. This nut can be used on various La San Marco steam and water valves. This item has the La San Marco part references 205007 and CCMMIN0820. You can use this tap fitting on the La San Marco 85, La San Marco 95, La San Marco 100 and the La San Marco 105.
This steam and water valve compression spring is used in a variety of La San Marco espresso machine models. The La San Marco part reference for this item is 200033 This compression spring is made from stainless steel and has a outer diameter of 16mm. the overall length of this spring is 20mm. The item has been made in Italy. You can use this...
Valve rod washer 20x6.3x1.5. Suitable for:CodeProducer93.00058 Carimali25012521 Expobar30370100 Expobar4054043423 FaemaL165/9 MarzoccoL165/9B Marzocco00000096 Nuova Simonelli10402040 Sanremo
Split pin 2x10. Suitable for:CodeProducer94.00092 Carimali30370110 Expobar4061024965 Faema05160007 Futurmat-ArieteL165/8 Marzocco9007709 Reneka10806370B Sanremo
The item on this product page is a steam and water valve knob. This steam and water valve knob can be used on various espresso machine brands such as Marzocco and Faema. The Marzocco part reference number is L165/V. This valve knob has been made from a black plastic. The valve knob does not come with the plastic insert. On the inside is a threaded brass...
The item on this product page is a water valve knob insert. This white water valve insert can be used on espresso machine brands such as Marzocco and Faema. The Marzocco part reference number is L165/MA. This water valve insert is made from a white plastic. The item itself has been made in Italy. This valve insert can be used on the Marzocco...
The item on this product page is a steam valve knob insert. This white steam valve insert can be used on espresso machine brands such as Marzocco and Faema. The Faema part reference for this item is 4831131214, for Marzocco the part reference number is L165/MV. This steam valve insert is made from a white plastic. The item itself has...
The item on this product page is a steam and water valve shaft, including gasket holder. This item can be used on various espresso machine brands such as Marzocco, San Remo, Vibiemme, La Scala, Faema, La Pavoni. The part reference numbers can be found in the extra info tab. This steam and water valve shaft has been made from low lead content brass. On...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |