The Mazzer Kony Dosatore is one of the Mazzer Kony models made by the Italian brand Mazzer. This series of coffee grinder can be the work horse of every big bar or restaurant. The Kony Dosatore is called a doser coffee grinder. The doser is the coffee reservoir on the front of the coffee grinder. This holds a certain amount of ground coffee which can be used directly.
On top of the Kony doser coffee grinder you have the coffee hopper, this holds the coffee beans. This hopper can be removed by loosening a screw and closing the shutter. Under this you will find the grind adjustment ring, the distance between the grinding burrs is determined with this ring. The grinding burrs which are used on this coffee grinder are conical ones and not flat ones. These burrs are made up out of a outer and inner burr, the outer burr has a outer diameter of 63,nd a inner diameter of 40mm. The inner burr has a outer diameter of 40mm and a inner diameter of 12mm.
From the grinding burrs the coffee is pushed towards the coffee storage doser. This doser holds a certain amount of ground coffee doses. This coffee will be dispensed when you pull the lever and the coffee falls into your filterbasket under the doser. You can also tamp the coffee right away with the tamper on the front of the doser.
This coffee grinder can be powered on a variety of ways, single phase 100/110V up to 220-230V, and 3 phase 380/400V. With the single phase versions you require a start capacitor to start the motor, this is not required with the 3 phase models. Note: the 3 phase version doesn’t use the same grinding burrs as the single phase version.
The tamper on this product p age is a OEM/Original Mazzer spare part. This tamper is attached to the coffee grinder. The Mazzer part references for this item are S000PRA02/QCQ, S000PRA02C and S000PRA02-C. This original tamper has been made from black plastic. The outer diameter of this tamper is 57,5mm. This tamper has been made in Italy You can use...
The item on this product page is a OEM/Original Mazzer spare part. This item is a compensation ring used in a Mazzer doser system. The part reference numbers for this item are S000ANA01, S000ANA01/AQQ and S000ANA01/QQQ. This compensation ring has a outer diameter of 32mm and has been made in Italy. This compensation ring can be used on the Mazzer...
The item on this product page is a OEM/Original Mazzer spare part. The part references for this item are S000CRA01, S000CRA02, S000CRA02/AQQ, S00SCRA02 and S00SCRA02/QQQ. This doser pawl has been made from casted and machined brass. This item is used in the doser mechanism of various Mazzer coffee grinders. The item has been made in Italy. This...
The coffee collecting tray on this page is used on a variety of Mazzer coffee grinders. This item is a OEM/Original Mazzer spare part. The Mazzer part references for this item are SMJ0PIB02 and SSJ0PIB02. This coffee collecting tray has been made from pressed stainless steel. The tray has been made in Italy. You can use this stainless-steel tray on the...
The item on this page is a the top dosing star. It is used in the doser machines of Mazzer. This item is a OEM/Original Mazzer spare part. The part references for this item are SMJSSTA04 and SSJSSTA04 This male doser star has been casted and machined afterwards. The outer diameter of this star is 108mm. This upper star has been made in Italy. You can...
The item on this page is a male dosing star. It is used in the doser machines of Mazzer. This item is a OEM/Original Mazzer spare part. The part references for this item are S000STA02, S000STA02/B, S000STA02/BQQ and S000STA02-B. This male doser star has been casted and machined afterwards. This item has been made in Italy. You can use this...
The axial fan on this page is used on various Mazzer coffee grinders. The Mazzer part references for this item are S00SVEB01 and S00SVEB03. This axial fan is the EBM 612NGH. This fan is a 12Vdc 2,6W and runs at 5600rpdm. The outer dimensions are 60x60mm and the thickness is 25mm. This fan has been made in china. You can use this axial fan on the...
The item on this product page is a reduction gear for various Mazzer coffee grinders. The Mazzer part references for this item are S000COR01 and S000COR01/QQQ. This reduction gear has a outer diameter of 100mm. The gear has been made in Italy. You can use this reduction gear on the Doser and the Electronic versions of various Mazzer models such as...
The reduction gear on this page is a OEM/Original Mazzer spare part. The Mazzer part references for this item are S000PIR02, S000PIR02/AQQ and S000PIR02-A. This reduction gear has been made from brass. The outer diameter is 41mm. The gear has in total 25 teeth. The item has been made in Italy. This reduction gear can be used on the doser and electronic...
The filter holder fork on this page is used on a variety of Mazzer coffee grinders. This portafilter fork is a OEM/Original Mazzer spare part. The part references for this item are S000FOB14 and S000FOB14/QQQ. This filter holder fork has been made from stainless steel. The length of this item is 73mm. The fork has been made in Italy. You can use...
The item on this page is a start relay which is used on various Mazzer coffee grinders. This item is a OEM/Original Mazzer spare part. The part references for this item are S000DIS01, S000DIS02, S000DIS14 and S000DIS14/QQQ. This start relay is the 4CR-1-670 28Z9R. and is used on doser and electronic coffee grinders of Mazzer such as the Mazzer Kony...
The contactor shown on this page is used with various coffee grinders from the brands Mazzer and Quamar. The Mazzer part reference for this item is S000COC08 and for Quamar 210035. This contactor has been made by the Italian company Lovato. This model is called the BG0910A. 400V 9A with a 230V 50/60Hz Coil. There are 3 normally closed (NC) and 1 normally...
The coffee hopper on this product page is a OEM/Original Mazzer spare part. This hopper is used on the Mazzer Kony. The Mazzer part references for this item are SKOSCAE03 and SKOSCAE03/QQQ This hopper is complete. It comes with the hopper, the lid, the shutter and the mounting mechanism to the coffee grinder. The Hopper has been made in Italy.
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |