The Nuova Simonelli espresso machine is fitted with 1 type of boiler, this is a horizontal model. Seen the espresso machine is available in a 1,2 and 3 group configuration. Between the models are a lot of similarities, but this is not always the case. For the correct references check the parts manuals.
The single group Nuova Simonelli Appia is fitted with a 1800W 230/115V heating element, for the 2 group version it is 3000W model and for the 3 group version it is even a 5000W version. Both in 230/400V. The heating element itself is fitted with a plastic protective cover.
Other components you will find on this boiler is a level probe, safety thermostat and a Sirai/Asco 3 phase pressure switch.
This type of boiler is a heat exchanger model(HX). The water inside the boiler is for steam and hot water. Heat exchangers running true the boiler diagonally heat up the brewing water. For this you have various brass fittings and injector tubes.
If you are not entirely sure which components you require for your Nuova Simonelli Appia boilers, don’t hesitate to contact us.
The item on this page is a Nuova Simonelli heating element cover. This cover is a OEM/Original Nuova Simonelli spare part. The Nuova Simonelli part reference number for this item is 05000047. This square heating element cover is made from a black plastic, on each side are holes for fixing this element to the flange of the heating element. This cover is...
On this product page you will find a heating element gasket suitable for various brands such as Nuova Simonelli and Victoria Arduino. The part references for Nuova Simonelli and Victoria Arduino are 02060015 Note this flat gasket is only suitable for the bolt on flanges. For the screw in heating elements is a different size available. This item...
The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high. This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0...
The level probe on this page is made by the Italian company Gicar. This level probe is used in a variety of espresso machines such as San Remo, Grimac and Astoria. The Astoria reference is 20258, the Grimac reference is GR212 and the San Remo part reference is 10112042. The Gicar part reference for this item is 9.0.81.02G The level probe shown on...
Probably the most used pressure switch used on the Asco P302/6 a 3 phase pressure switch. This pressure switch has been used espresso machines like: La Marzocco, Faema, Cimbali, Astoria, Wega, Nuova Simonelli, La Spaziale, San Remo and so on.The brand Asco used to be the company Sirai, since a while this name has changed but the product remains the same....
The boiler safety valve shown on this page can mainly be found on La Pavoni espresso machine boilers. The La Pavoni part reference for this item is 395221G This boiler safety valve has a male 3/8” BSP-G thread. The pre-set pressure is 1,8 bar and nonadjustable. The seal used is a FKM seal, when opened the steam outlet is 872 L/M. This valve is CE...
The item on this product page is a contact thermostat and can be used on various espresso machine brands such as La Marzocco, Nuova Simonelli and Victoria Arduino. This contact thermostat switches off at 135°C. it needs to be reset manually. This thermostat is rated up to 16A at 250V. the item has been made in Italy. You can use this contact...
The heating element on this page you will mainly find with espresso machines from the brands Nuova Simonelli and Victoria Arduino. The Nuova Simonelli part number for this item is 14100012 and for Victoria Arduino is 14100012 This heating element produces 5000W at 230V and has 6 connecting poles. This heating element has a immersed length of...
This 2 group heating element is suitable for various espresso machine models and brands such as Victoria Arduino and Nuova Simonelli. The part references for the Nuova Simonelli 14100011 and for Victoria Arduino 14100011. This heating element produces 3000W at 230/400V and has 6 connecting poles on the flange. The immersed length of the element is...
The item on this product page is a heat exchanger tube used on various Nuova Simonelli and Victoria Arduino espresso machines. This item is a OEM/Original spare part. The Nuova Simonelli part reference number for this item is 98030055, for Victoria Arduino the part reference number is 98030055. This tube has been made from the material PTFE. The...
This cover plate is used to cover the surroundings of the pressure gauge and the water level. This plate is used on various Nuova Simonelli espresso machines and has the part reference number 05000817.G. This item is made in Italy This unit can be used on various Nuova Simonelli models such as the Nuova Simonelli Appia and the Nuova Simonelli Aurelia....
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |