Astoria - مستوى المياه
Astoria - مستوى المياه
هناك 19 منتجاتالعلامة التجارية لآلة الإكسبريسو Astoria شركة (سي إم إيه) تستخدم على مجموعة متنوعة من أجهزة إكسبريسو نظارات لمراقبة مستوى الماء داخل المرجل. الزجاج المنظر هو أداة مثالية للتحقق ما إذا كان هناك شيء خاطئ مع آلة الإكسبريسو الخاصة بك.
زجاج الرؤية على Astoria آلة إكسبريسو موجودة من إصلاح أعلى وأسفل. بين هذه الأدوات توجد زجاج رؤية يبلغ قطرها 11 مم وطولها 170 مم. هذا الزجاج المرئي مغلق بمسمار مسطح ويحتجز في مكانه بواسطة غسالة نحاسية ومحبة تثبيت. هذا النموذج من زجاج الرؤية يمكن العثور عليه على Astoria برافا, Astoria Divina, Astoria دورا, Astoria Gloria, Astoria Perla و Astoria Pratic.
الـ Astoria رابالو لديه صمام أسفل وعلوي مختلف، لذلك هذه المكونات ليست متطابقة مع العناصر الموضحة أعلاه.
غطاء نحاسي 18x14x1.5mm 1/4"
(0) The flat copper gasket on this product page can be used with a variety of espresso machines and on various applications. You can use this copper gasket on espresso machines such as Marzocco, Casadio, ECM Heidelberg, La Scala, La Cimbali, Faema, Astoria, Wega, Nuova Simonelli, Wega and Rancilio. You will mainly see the use of this copper gasket to seal...
Astoria Wega حامل صمام البخار
(0) This steam and water tab gasket holder can be used in almost every steam and water valve used by the espresso machine manufacturer Astoria CMA. This item can be found in Astoria espresso machines with part reference 25616 and with Wega espresso machines under the reference WY25616. This gasket holder has on one side room for the flat gasket with the...
غسالة قضيب الصمام 12x8x1mm
(0) The brass washer on this product page is used in various espresso machines made by Astoria and Wega. The Astoria part number for this item is 25655 and the Wega part number is WY25655. This brass washer has a outer diameter of 12mm a inner diameter of 8mm and a thickness of 1mm. This washer is used to spread the pressure of the steam and water shaft...
Astoria Wega محار الصمام
(0) This brass nut you will find on almost every steam and water valve of the Astoria CMA group. This brass nut holds the steam and water valve shaft in place inside the gasket holder. The Astoria part reference for this item is 25461 and the Wega part reference for this item is WY25461 You can find this item basically on every model like the Astoria...
Astoria Wega غطاء عمود مياه البخار
(0) The valve shaft gasket on this page is used with basically every steam and water valve manufactured for Astoria and Wega espresso machines. This gasket makes sure that there doesn’t leak any steam or water past the shaft of the valve. The Astoria part reference is 12204 and the Wega part reference is WY12204 This gasket has been made out...
Astoria/Wega حبة نحاسية M3
(0) The nut on this page is a M3 nut made from brass. You will find this type of nut on variety of steam and water valves of Astoria and Wega espresso machines. The Astoria part reference for this item is 23050 and the Wega part reference is WY23050. This brass nut has a metric female thread of M3. The nut has made according to specifications of...
Astoria زجاج الرؤية 11x170ملم
(0) On this page you will find a sight glass for various Astoria and Wega espresso machines. The Astoria part number for this sight glass is 21300 and the Wega part number is WY21300. The sight glass has a outer diameter of 11mm and a overall length of 170mm. This sight glass doesn’t have any reference lines. This sight glass of 11x170mm can be used...
طوقا الزجاج البصر 16x10x8mm
(0) The sight glass gasket on this page can be used with a variety of espresso machine brands. Such as Royal, Grimac, Astoria, Wega, Victoria Arduino and BFC. This gasket is made from the gasket material EPDM. The outer diameter of the gasket is 16mm, the inner diameter is 10mm and the height is 8mm. The sight glass does have a edge on it. The gasket has...
غسالة النحاس 18x12x1mm
(0) On this page you will find a brass washer which is suitable for the Astoria and Wega water level assembly. This washer makes sure that the gasket doesn’t tear when the sight glass nut is tightened. This washer has the Astoria reference 25652 and the Wega part is WY25652 This gasket has a outer diameter of 18mm a inner diameter of 12mm...
Astoria/Wega المياه مستوى المكسر 1/2 " 12mm
(0) This page shows the water level nut for a Astoria and Wega sight glass. This nut makes sure that the sight glass stays in place and seals properly. If the nut is screwed down the sight glass seal will slightly compress and seal off the sight glass. The part number for this item is for Astoria is 25383 and for Wega WY25383 This sight glass nut...
مؤشر المستوى الأحمر
(0) This red ball is a level indicator ball. This ball floats inside the water level tube. Seen it’s not always easy to see the water level makes a floating red ball it a lot easier. There are more colours available with different diameter of balls. This red ball has a diameter of 5,8mm and is made in Italy. This type of level indicator can be found...
السيجر الخارجية الفولاذ المقاوم للصدأ 6 مم
(0) This shaft retaining ring is mainly used on the Astoria and Wega steam valve axles. This is done to keep the valve gasket holder attached to the valve axle. The part number used for this item by Astoria is 10001 and for Wega is it WY10001 This shaft retaining ring has a internal diameter of 6mm a external diameter of 12,3mm and a thickness of...
Astoria Wega الربيع المشترك للصنبور...
(0) The compression spring on this page is mainly used with the steam and water valves on the Astoria and Wega espresso machines. But it has also multiple purposes in the steam valve. This item is a OEM/Original item. The Astoria part number is 10452 and the Wega part number is WY10465. This compression spring is used to put pressure on the shaft gasket...
غسيل النحاس 3/8" 28x17x2ملم
(0) The item on this product page is a OEM/Original Astoria CMA spare part. This brass washer can be used on various Astoria and Wega espresso machines. The part reference for this item are for Astoria 25651 and for Wega WY25651. This washer has been made from brass. The outer diameter is 28mm and the inner diameter is 17mm. The thickness is 2mm. This...
حشية نحاسية مسطحة 26x20x2mm
(0) The product on this page is a flat copper gasket. This copper gasket can be used in various applications like water and steam tabs, water levels and water inlet tabs. This product can be found with brands like Astoria, Bezzera and Wega. The outer diameter of this flat copper gasket is 26mm. The inner diameter of the gasket is 20mm and the thickness is...
Astoria Wega غطاء 15x4x4ملم
(0) This product is a flat EPDM gasket used in steam and water valves and water inlet valves of the Astoria CMA group. So you will find them in Astoria and Wega espresso machines. The Astoria part number for this item is 12203 and the Wega part number is WY12203. This gasket has been made from EPDM. The outer diameter of this gasket is 15mm. the inner...
Astoria و غطاء زجاجي مستوى الويجا ملون...
(0) On this page you will find a body part suitable for espresso machines made by the Italian company Astoria CMA. This piece of pressed metal goes behind the sight glass to make the water level more visible. This item can be used on Astoria and Wega espresso machines. The Astoria part number is 44002 and the Wega part number is WY44002. This...
Astoria/Wega تثبيت مستوى المياه السفلي
(0) The item on this page is a lower water level fitting for the Astoria and Wega espresso machines. This item is OEM/Original spare part. The Astoria part number for this item is 53001 and the Wega part number is WY53001 This lower water level fitting has been casted out of brass and is machined afterwards. The fitting which is used to attach the...
