The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013. This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...

The grinding burr locking spring is a OEM/Original Fiorenzato coffee grinder spare part. The Fiorenzato part references for this item are 001.002.011 and 700000001. These compression springs are used in combination with the grinding burrs. These compression spring has been made in Italy. You can use these compression springs on basically every...

This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...

The steam and water valve knob on this page is mainly famous as the knobs used on the classic Faema E61 espresso machines. But nowadays they are used in a variety of other brands as well. Like with Vibiemme, La Scala and Grimac. This type of knob can also be used on the modern Faema E61 legend and Jubilee espresso machines. For the part references check...

The paper gasket on this product page can be used on La Carimali espresso machine brewing groups. With this paper shim you can fine adjust the locking position of your portafilter. Seen your La Carimali brewing group and portafilter ears will wear when in use. The Carimali part reference for this paper gasket is 74.00009. This gasket has a outer diameter...

The capacitor on this page is a 10µF model. This model is manufactured by the Italian company Ducati Energia. The part reference for this item is 41610.1564. This capacitor is used as a start capacitor for pump motors and as a start motor for the coffee grinder motor. This capacitor can be found with brands such as Casadio, Carimali, Vibiemme, Cimbali,...

The item on this product page is a crushable copper gasket. This gasket can be used with a variety of espresso machine brands such as Casadio, ECM Heidelberg, La Scala, Cimbali, Faema, Astoria, Nuova Simonelli, Pavoni, Wega and Rancilio. This crushable copper gasket has a outer diameter of 18mm a inner diameter of 14mm and a thickness of 2mm. This gasket...

The sight glass gasket on this page is a OEM/Original La Spaziale spare part. This item has the La Spaziale part reference of 00265. This sight glass gasket has been made from red silicone. The outer diameters are 17 and 14mm. The internal diameter is 11mm. The height of the gasket is 9 and 4mm. This gasket has been made in Italy. You can find this red...

On this product page you will find a complete steam tube which is suitable for the Faema E61 espresso machine. As well for the Faema President and Faema Lambro. This steam wand has a overall length of 250mm. To connect the steam wand to the valve there is a male 3/8” BSP-G thread. The steam tip has a internal 1/8”BSP-G thread and has 4 steam...

On this page you will find a o ring which has a cord diameter of 2,62mm and a internal diameter of 20,63mm. the material for this o ring is Viton. The application in espresso machines for this o ring is really broad. This ranges from application in brewing groups with brands like ECM Heidelberg, la Scala, Bezzera and Brasilia. But also the application in...

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This type of brass welding cap is the smallest welding...

On this page you will find a red bipolar switch. This switch illuminates when turned into the on/1 position. It has a silk screen print which symbolizes on/off. In the way of 0 and 1. This switch is rated up to 16A at 250V. The maximum operating temperature is 120 degree Celsius. There are 4 male spade connectors. The switch can be mounted in a hole with...