Bezzera BZ10
The Bezzera BZ10 has been fitted with a double scale pressure gauge, or manometer. So you will see 2 needles, one is for the pump pressure and the other is for the boiler pressure. The boiler pressure goes from 0 up to 3 bar and the pump pressure goes from 0 up to 16 bar.
The Bezzera BZ10 espresso machine is fitted with a water tank, from this tank the water is pumped, with a Ulka vibration pump, towards the brewing group and into the boiler. So you won’t be able to fit a main water connection to this espresso machine.
This model of Bezzera espresso machine is fitted with a solenoid operated Bezzera ring brewing group, so it hasn’t been fitted with a E61 style of brewing group.
Well this does depend on how old your Bezzera BZ10 is. Seen you have 2 model versions. There is a pre- 26-06-2010 and a post 27-05-2010 version. The older type is in it’s original configuration isn’t available anymore, for this is a relay rebuild kit available which is the same as the new model.
We would not advice to do so, seen the capacity is too little to proper function in a bar or a restaurant. For a small office this espresso machine would be a good solution, as well as the use in a kitchen.
Bezzera BZ10
Bezzera BZ10
هناك 83 منتجاتThe Bezzera BZ10 espresso machine is one of the most popular domestic espresso machines the oldest espresso machine in the world makes. To summarize what this espresso machine is, a solenoid operated espresso machine which get’s its water from a water tank of the back of the machine.
This espresso machine, the Bezzera BZ10, is fitted with a vertical single heat exchanger (HX) boiler. In the bottom of the boiler you have the main 1200W heating element, which can be 110 or 220/230V. This boiler is filled from a water tank on the back of the espresso machine. To pump water into this you use a Ulka vibration pump. This pump is also used to brew the coffee.
The brewing group used on the Bezzera BZ10 is not one of the E61 style type. But a brewing group which is solely used by the Bezzera brand. This brewing group is a solenoid operated brewing group, made up out of 2 main components. The main body and the portafilter coupling bell. A other feature you don’t see that often on a domestic espresso machine is that this brewing group has been fitted with a heating element.
This coffee machine is not a volumetric model, otherwise it should have been fitted with a flowmeter. In this case the machine is operated by moving a switch up and down to start and stop the brewing process.
1/2، 1/2، 1/2، ميم، 1/4(و)
(0) This brass casted boiler fitting is used on the bottom side of the heat exchanger (HX) of the espresso machine boiler. It attaches to the HX with a ½”male flat sided connection. The other ½”pipe connection is for the return pipe from the brewing group. The ¼”female thread on the bottom is for the injector tube. In...
مجمّع مجموعة الكروميد E61
(0) The drain valve on this page can be used on various E61 style of brewing groups. Models such as ECm, ECM Heidelberg, La Pavoni, Rocket and Vibiemme espresso machines. Not on the Faema E61 This drain valve has been machined from a single piece of brass. After that it has been polished, nickel plated and finally chrome plated. This item is made in Italy....
صيف الضغط 14x33 ملم
(0) This stainless steel spring 14x33mm is used in a variety of locations in a espresso machine. The most common location for this compression spring is in a Faema E61 brewing group of a E61 style brewing group. The spring seats inside the top trumpet and makes sure that the top brewing valve closes when the brewing process is stopped, and the lever has...
صيف الضغط 13x42 ملم
(0) This stainless steel compression spring is used in the Faema E61 and E61 style brewing groups. But what does this specific do? Well this is the last compression spring in the brewing group. It is the compression spring in the brewing valve which closes the exhaust valve all the way at the bottom of the E61 brewing group. Besides the E61 group spring it...
حشية فلتر القهوة 73x57x9mm
(0) Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these...
مجموعة الاختراق 0.6mm
(0) This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...
طوقا PTFE 22x16x2mm
(0) This a universal Polytetrafluoroethylene (PTFE) gasket with 22x16x2mm. The gasket is used on a variety of espresso machine components. This type of gasket found boilers, brewing group and valve assemblies. The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera,...
Faema E61 camme spring 15x25mm
(0) This stainless steel compression spring with the dimensions of 15x25mm is normally used as a camme spring on a Faema E61 brewing group or on E61 style brewing groups. Like with the Faema E61, Faema E61 legend, Grimac, Isomac, Pavoni, Wega and a variety of other brands which use a e61 style of brewing group. Besides that option, this model...
Faema E61 sleeve
(0) On this page you will find a camme guide bushing. This part is a generic part for Faema E61 brewing groups and the brewing groups made in the E61 style. This part is made from brass with a total length of 28mm, the outer dimensions are 15 and 10 mm. The ID is 8mm and the head of the bushing has a thickness of 5mm. This part slides over the shaft off the...
E61 طراز E61
(0) On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....
E61 شاشة الاستحمام 60 ملم
(0) This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070. The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm...
فيما E61 plug for camme holder
(0) This ½” chrome plated stuffing nut has a central hole of 10,7mm. The item itself has a height of 17mm. You need a metric key 22 to install this item. This is quite a common key size in most peoples toolbox. But what is the function of this part and where can it be found. This threaded stuffing gland is used in the side of the Faema E61,...
طوقا PTFE 35x30x2mm
(0) The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...
غطاء PTFE 25.4x21.2x5.5mm
(0) This flat Polytetrafluoroethylene (PTFE) gasket 25.5x21x5mm is used on Vibiemme (GUARCASUTEPI) espresso machine brewing groups. As well in the manual lever brewing group as well for the solenoid group. This part seals off the bottom off the upper sleeve in the brewing group. If you are not sure if this item will fit your Vibiemme Domobar, Vibiemme...
قفل حشية المجموعة
(0) If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega,...
PTFE gasket 26x21x2mm
(0) This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
E61 عصا كامي
(0) This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...
طوق عنصر التسخين 41x33x3 مللي متر
(0) On this page you will find a fibre gasket with a outer dimension of 41mm a inner one of 33mm and height of 3mm. This fibre gasket is used for a heating element with a flange diameter of 1”. This specific heating element gasket is used for Bezzera(5492004) espresso machines with the models: Bezzera BZ35, Bezzera BZ40, Bezzera Galatea Domus and the...
A few questions we get often asked by our customers.
How do I check the pressure of my Bezzera BZ10 espresso machine?
The Bezzera BZ10 has been fitted with a double scale pressure gauge, or manometer. So you will see 2 needles, one is for the pump pressure and the other is for the boiler pressure. The boiler pressure goes from 0 up to 3 bar and the pump pressure goes from 0 up to 16 bar.
Is the Bezzera BZ10 espresso machine fitted with a water tank or a main water connection?
The Bezzera BZ10 espresso machine is fitted with a water tank, from this tank the water is pumped, with a Ulka vibration pump, towards the brewing group and into the boiler. So you won’t be able to fit a main water connection to this espresso machine.
What kind of brewing group does the Bezzera BZ10 have?
This model of Bezzera espresso machine is fitted with a solenoid operated Bezzera ring brewing group, so it hasn’t been fitted with a E61 style of brewing group.
What kind of temperature control mechanism does the Bezzera BZ10 have?
Well this does depend on how old your Bezzera BZ10 is. Seen you have 2 model versions. There is a pre- 26-06-2010 and a post 27-05-2010 version. The older type is in it’s original configuration isn’t available anymore, for this is a relay rebuild kit available which is the same as the new model.
They are both operated with a Ma-ter pressure switch with is fitted with a safety valve and with a relay. The older ones had a build on relay, but the latest ones have a separate relay.
Can I use the Bezzera BZ10 espresso machine for commercial purposes?
We would not advice to do so, seen the capacity is too little to proper function in a bar or a restaurant. For a small office this espresso machine would be a good solution, as well as the use in a kitchen.