على هذه الصفحة سوف تجد مجموعة واسعة من أجزاء صمامات مجموعة التحضير. المواد الموجودة في هذه الصفحة تتعلق بشكل رئيسي بمجموعات صنع الجعة اليدوية مثل E61 أسلوب مجموعات البيرة. لذا ستجدون أشياء مثل حاملات غشاشات الصمامات، وأحواض الصمامات، والغشاشات، وصمامات التفريغ وكذلك الغشاشات التي تأتي مع حاملات غشاشات الصمامات.
يمكن استخدام هذه المكونات المكونة لمجموعة التخمير في العديد من العلامات التجارية لآلات إسبريسو مثل Vibiemme(VBM), Faema, Rocket, Bezzera, La Pavoni, Wega, Brasilia و Grimac.
إذا كنت غير متأكد من المكونات المناسبة لتطبيقك أو آلة الإكسبريسو. لا تتردد في الاتصال بنا.
The item on this product page is the upper drain sleeve. This drain sleeve can be used with a wide selection of E61 brewing groups. Such as with the brand Faema, ECM, ECM Heidelberg, Isomac, Pavoni, Rocket and San Remo. This drain sleeve has been made from machined brass. This has been afterwards been nickel and chrome plated. The fitting on the inside...
Faema E61 brass shaft square shaft 34mm. make the bottom brewing group valve open up when the camme is lowered, because the part is screwed into the valve gasket holder. Return to the Faema E61 group parts overview
On this page you will find a camme guide bushing. This part is a generic part for Faema E61 brewing groups and the brewing groups made in the E61 style. This part is made from brass with a total length of 28mm, the outer dimensions are 15 and 10 mm. The ID is 8mm and the head of the bushing has a thickness of 5mm. This part slides over the shaft off the...
The item on this product page is a flat gasket used on the lever brewing groups of La San Marco. The La San Marco part reference numbers for this item are 109059 and CTSGUA0190. This flat gasket is made from EPDM. The outer diameter is 16mm, the inner diameter is 5mm and the thickness is 4mm. This gasket has been made in Italy.
This brewing group spare part is used on various older Faema brewing groups. The Faema part reference number for this item is 3161116451. This valve part is used in the exhaust side of the brewing group. This valve part has been made from machined brass. on the inside of the gasket holder is a gasket already installed. This item has been made in...
The item on this product page is used in the famous Faema E61 brewing groups, note this item is not suitable for E61 style of brewing groups. The Faema part reference numbers for this item are 2161136656 and 903835000. This brewing valve part is used in the drain section of the E61 brewing group. The shaft on this item can be a square or a...
The item on this product page is a item which can only be used on the Faema E61 brewing groups. So it is not suitable to use on the E61 style of brewing groups. The Faema part reference number for this item is903828000. This drain valve is used in the bottom section of the brewing group, all the way at the end. This item is made from machined...
This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...
The item on this product page is only used in some San Remo brewing groups. This item is a brewing group extension fitting. This product is a OEM/Original San Remo part. The part reference number for this item is 14852032A This extension has been made from chrome plated brass. The hole is 6mm. The group side is a 1/8” male fitting, the inlet side...
On this page you will find a flat EPDM gasket. This gasket is used as a valve seal in the steam and water valves. This specific valve gasket has the La Spaziale reference 00221. The valve gasket has a outer diameter of 15mm a inner diameter of 6mm and a thickness of 3,5mm. the sealing material is EPDM. This gasket can be used in various La Spaziale...
The valve gasket on this page can be used on numerous of espresso machine brands such as Vibiemme, Wega, La Scala, Faema, La Pavoni, Brasilia and Grimac. This gasket in mainly used in the steam and water valves as well as in the water inlet valves. But the best example is in the E61(type) of brewing groups. The part reference list can be found in the...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |