Vibiemme مرشح محمول بلا قاع
55-540-L-1165188
>41,73 € شامل ضريبة القيمة المضافة.34,49 €بدون ضريبة القيمة المضافة
شامل للضريبة
تحديد
The portafilter on this product page is a bottomless portafilter which can be used on a variety of Vibiemme brewing groups. This is the case for the commercial and the domestic espresso machine models.
This portafilter has no spout, but a bottom which has been cut out. The ear orientation is 90 degree and the thickness of the ears is 5,5mm. The portafilter comes with a stainless steel spring and a double filter basket. This portafilter is made in Italy.
You can use this portafilter on the Vibiemme Domobar, Vibiemme Domobar Super, Vibiemme Domobar Junior, Vibiemme Cubo, Vibiemme Lollo, Vibiemme Replica, Vibiemme Evolution, Vibiemme Revolution.
Extra Info
| فيبييمي | Chimaera, Cubo, Domobar, Domobar Junior, Domobar Super, Dosaplus, Evolution, Kometa, Lollo, Mercury, Minimax, Replica, Revolution |
| نوع فلتر القهوة | Bottomless |
| اكتب الجزء | Bottomless portafilter |
| ماركة | Vibiemme |
| بلد التصنيع | Made in Italy |
Reviews (0)
No customer reviews for the moment.
Frequently Asked Questions
In some cases bottomless portafilters are interchangeable between brands, such as the Nuova Simonelli bottomless portafilter, this one is interchangeable with the one used on most Victoria Arduino espresso machines. This has to that it is the same brand.
You can add any filterbasket to the bottomless portafilter. But in most cases a deep double filterbasket is installed. This has to do that there is no bottom in the way.
In almost most cases bottomless portafilters are made from brass which has been chrome plated. A few brands make bottomless portafilters from stainless steel. But that is a minority
Bottomless portafilters start as regular casted portafilters. But during the machining process the bottoms are cut out of the casting, which creates a bottomless portafilter. After this the portafilters are sanded and polished into a mirror finish and chrome plated.
No, the portafilters used on Breville, Sage and Solis espresso machines are unique to those brands. And are also a lot smaller then the standard 58mm portafilters, which are used for instance on E61 brewing groups.
We would not advice to do so, seen the capacity is too little to proper function in a bar or a restaurant. For a small office this espresso machine would be a good solution, as well as the use in a kitchen.
Well this does depend on how old your Bezzera BZ10 is. Seen you have 2 model versions. There is a pre- 26-06-2010 and a post 27-05-2010 version. The older type is in it’s original configuration isn’t available anymore, for this is a relay rebuild kit available which is the same as the new model.
This model of Bezzera espresso machine is fitted with a solenoid operated Bezzera ring brewing group, so it hasn’t been fitted with a E61 style of brewing group.
The Bezzera BZ10 espresso machine is fitted with a water tank, from this tank the water is pumped, with a Ulka vibration pump, towards the brewing group and into the boiler. So you won’t be able to fit a main water connection to this espresso machine.
The Bezzera BZ10 has been fitted with a double scale pressure gauge, or manometer. So you will see 2 needles, one is for the pump pressure and the other is for the boiler pressure. The boiler pressure goes from 0 up to 3 bar and the pump pressure goes from 0 up to 16 bar.
