The Bezzera BZ10 has been fitted with a double scale pressure gauge, or manometer. So you will see 2 needles, one is for the pump pressure and the other is for the boiler pressure. The boiler pressure goes from 0 up to 3 bar and the pump pressure goes from 0 up to 16 bar.
The Bezzera BZ10 espresso machine is fitted with a water tank, from this tank the water is pumped, with a Ulka vibration pump, towards the brewing group and into the boiler. So you won’t be able to fit a main water connection to this espresso machine.
This model of Bezzera espresso machine is fitted with a solenoid operated Bezzera ring brewing group, so it hasn’t been fitted with a E61 style of brewing group.
Well this does depend on how old your Bezzera BZ10 is. Seen you have 2 model versions. There is a pre- 26-06-2010 and a post 27-05-2010 version. The older type is in it’s original configuration isn’t available anymore, for this is a relay rebuild kit available which is the same as the new model.
We would not advice to do so, seen the capacity is too little to proper function in a bar or a restaurant. For a small office this espresso machine would be a good solution, as well as the use in a kitchen.
The Bezzera BZ10 espresso machine is one of the most popular domestic espresso machines the oldest espresso machine in the world makes. To summarize what this espresso machine is, a solenoid operated espresso machine which get’s its water from a water tank of the back of the machine.
This espresso machine, the Bezzera BZ10, is fitted with a vertical single heat exchanger (HX) boiler. In the bottom of the boiler you have the main 1200W heating element, which can be 110 or 220/230V. This boiler is filled from a water tank on the back of the espresso machine. To pump water into this you use a Ulka vibration pump. This pump is also used to brew the coffee.
The brewing group used on the Bezzera BZ10 is not one of the E61 style type. But a brewing group which is solely used by the Bezzera brand. This brewing group is a solenoid operated brewing group, made up out of 2 main components. The main body and the portafilter coupling bell. A other feature you don’t see that often on a domestic espresso machine is that this brewing group has been fitted with a heating element.
This coffee machine is not a volumetric model, otherwise it should have been fitted with a flowmeter. In this case the machine is operated by moving a switch up and down to start and stop the brewing process.
On this product page you will find a power relay which is used in a variety of La Carimali espresso machines. The Carimali part reference for this item is 96.00590. This relay has been manufactured by the company Finder, the manufacturers’ part reference is FIN628282300000. This relay has been rated up to 16A at 230V 50/60Hz. You can use this...
On this page you will find one of the most used espresso machine pumps. The Ulka Ex5 48W 230V espresso machine vibration pump. This pump produces 48W at 230V with 50Hz. The inlet connection is 6mm, suitable for a silicone hose. The pump outlet is a 1/8” Bsp, this side is made from brass. There is also a Identical pump the Ulka EP5, this one has a...
The item on this page is a OEM/Original Bezzera electronic kit for various older domestic Bezzera espresso machines. The Bezzera part reference for this item is 7433017R. This kit is made up out of 3 items, the wiring loom, the relay and the pressure switch. The Pressure switch is a Ma-ter C110P which has been set at 2,3bar and is rated up to 15A at...
The level regulator on this product page is a OEM/Original Bezzera spare part and used on various models. The Bezzera part reference number for this item is 7661036.01PR. This unit runs on 220-240V AC and is suitable for 1 temperature probe. This unit is made in Italy. You can use this original Bezzera level regulator on the Bezzera BZ07, Bezzera BZ10,...
The Item on this product page is a OEM/Original Bezzera conical seal. This gasket is used in the steam and water valves of various Bezzera machines. The Bezzera part reference for this item is 5494004 This conical shaped gasket has been made from PTFE graphite, that’s why it is not white. The outer diameter is 12mm, the inner diameter is 5mm and...
The item on this product page is a level probe which can be used on a variety of Vibiemme espresso machines. The Vibiemme part refence number for this item is ELETSON. This level probe has a male ¼” fitting and a overall length of 140mm. This level probe has a 90 degree angle at the connector. This level probe can be used on a variety of...
A few questions we get often asked by our customers.
How do I check the pressure of my Bezzera BZ10 espresso machine?
The Bezzera BZ10 has been fitted with a double scale pressure gauge, or manometer. So you will see 2 needles, one is for the pump pressure and the other is for the boiler pressure. The boiler pressure goes from 0 up to 3 bar and the pump pressure goes from 0 up to 16 bar.
Is the Bezzera BZ10 espresso machine fitted with a water tank or a main water connection?
The Bezzera BZ10 espresso machine is fitted with a water tank, from this tank the water is pumped, with a Ulka vibration pump, towards the brewing group and into the boiler. So you won’t be able to fit a main water connection to this espresso machine.
What kind of brewing group does the Bezzera BZ10 have?
This model of Bezzera espresso machine is fitted with a solenoid operated Bezzera ring brewing group, so it hasn’t been fitted with a E61 style of brewing group.
What kind of temperature control mechanism does the Bezzera BZ10 have?
Well this does depend on how old your Bezzera BZ10 is. Seen you have 2 model versions. There is a pre- 26-06-2010 and a post 27-05-2010 version. The older type is in it’s original configuration isn’t available anymore, for this is a relay rebuild kit available which is the same as the new model.
They are both operated with a Ma-ter pressure switch with is fitted with a safety valve and with a relay. The older ones had a build on relay, but the latest ones have a separate relay.
Can I use the Bezzera BZ10 espresso machine for commercial purposes?
We would not advice to do so, seen the capacity is too little to proper function in a bar or a restaurant. For a small office this espresso machine would be a good solution, as well as the use in a kitchen.
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |