The hydraulic components on the La Cimbali M39 espresso machines are quite a broad spectrum of parts. This does depend on if it is a La Cimbali M39 Classic or a Cimbali M39 Dosatron.
On the La Cimbali M39 Dosatron you have hydraulic components like the over pressure valve, flowmeters and the pressure switch. On the La Cimbali M39 Dosatron this is on the earlier models a mechanical single phase switch and on the later models it became a pressure sensor. The Cimbali M39 Dosatron versions can also be fitted with the Cimbali Thermodrive system, this is not standard on every espresso machine.
The La Cimbali M39 Classic espresso machine does have the over pressure valve, but it doesn’t have the flowmeters seen it is not a volumetric espresso machine. It is also not fitted with a digital pressure sensor like the Dosatron, but with a mechanical pressure switch like the Asco P302.
If you are not sure if you can find the correct hydraulic parts for your La CimbalI M39 Espresso machine. Don’t hesitate to contact us.
You can find on this product page a small boiler pressure manometer. This model has been used in various La Cimbali and Faema espresso machines. The Cimbali part reference for this item is 3781-133-400 and for Faema 3781133400. There are more product references for this item, you can find those in the extra info tab. This pressure gauge is used for...
The solenoid valve on this product page is one made by the company Lucifer. The coil states Parker, this is the main company. This solenoid valve is used in various La Cimbali and Faema espresso machines. This solenoid valve is a 2 way valve. The coil used is a 9W 24V model. The hole diameter is 2,5mm and is sealed off with a FKM seal. The maximum...
On this product page you will find a flowmeter suitable for various brands of the La Cimbali Group. This flowmeter has been manufactured by the Italian company Gicar. The part references of Gicar for this item are 9.0.26.11G and 9.0.56.11G This flowmeter is made out of 2 pieces. The brass, low lead, casting and the measuring device which is made from a...
On this page you will find a small pump manometer, one of the smaller models. This model you mainly see used with the La Cimbali group. The la Cimbali part number for this item is 3781-133-399 and Faema part number is 3781133401 This manometer is a pump manometer with a pressure range of 0 – 16 bar. The rim diameter of this pressure gauge is...
This item is a drain tank which is used on a variety of La Cimbali espresso machines. The La Cimbali part reference numbers for this item are 422025020 and 422-025-020. This drain tank is installed in the espresso machine with 2 screws, one on each side. The main drain fitting is a male ¾”. This drain tank is normally used...
This air regulator valve can be found on a variety of espresso and automatic coffee machines of Gruppo Cimbali. This item is used on traditional models such as the M100, M39 Faema Emblema and the stylema. But also on a variety of super automatic coffee machines such as the Cimbali M1, M2, M51 and Faema models such as the X1, X3 and the X30. The in and...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |