This hopper is especially made for the Eureka and Nuova Simonelli Mythos coffee grinder.
This hopper comes as a complete set. The hopper itself, the inner protection on the inside, the lid of the hopper and the shutter to close off the hopper at the bottom.
This hopper is suitable for the Eureka Mythos with part number 4000.0000 and the Nuova Simonelli...
€229.04
Eureka / Nuova Simonelli Mythos coffee tray
The coffee collecting tray is a standard item with most coffee grinders. Also, with the Nuova Simonelli and Eureka Mythos. This is a plastic coffee collecting tray which slides into the frame of the coffee grinder. It can be removed easily to clean the coffee collecting tray
The part number for the Eureka Mythos is 4100.0009 and for the Nuova...
€45.36
Eureka / Nuova Simonelli Mythos electronic box 230V
On this page you will find the main electronic device for the Nuova Simonelli Mythos, Eureka Mythos but also on the Victoria Arduino Mythos. This unit is the controller which distributes the power to the vital parts of the coffee grinder. This can only used with a 230V coffee grinder, not with the 110V models made from this specific model.
The part...
€152.57
Ducati Energia capacitor 16µF 450V
The capacitor on this page is a 16µF model. This model is manufactured by the Italian company Ducati Energia. The part reference for this item is 41610.9964. This capacitor is used as a start capacitor for the coffee grinder motor. This capacitor can be found with brands such as Cimbali, Faema, Anfim, Spaziale, Mazzer, Astoria, Brasilia and Macap.
This...
€9.95
Eureka / Nuova Simonelli burrs holder bottom
This burr holder is used on a couple of coffee grinder brands. Nuova Simonelli (15080009 ) and Eureka(2520.0005). On this part the bottom burr (15030057) is also attached with 3 screws. This is also the rotating burr, seen it is attached to the motor shaft.
On which grinders can I use this burr holder? On the Nuova Simonelli MDL, Nuova Simonelli...
€67.35
Victoria Arduino Mythos grinder activator switch
This type of switch is used on the timer version of the Victoria Arduino Mythos coffee grinder. This specific item is a OEM/original Victoria Arduino spare part. The part reference number for this item is 15030095. You push with your portafilter against this switch, and the grinding process will start.
€17.67
Nuova Simonelli/Victoria Arduino Mythos grinding burrs
This set of coffee grinding burrs can be used on various Nuova Simonelli and Victoria Arduino coffee grinders. The Nuova Simonelli part reference number is 15080002 and for Victoria Arduino this is 15080002.
This set of grinding burrs is a OEM/Original set of Nuova Simonelli grinding burrs. The outer diameter of these grinding burrs is 75mm.
You can use...
€192.86
Nuova Simonelli axial fan 80x80x25
This axial fan on this page is used in the NS and VA coffee grinder. This fan is 80x80x25mm, with cable and runs on 230V 50/60Hz. The Cable has also been provided with 2 male spade connectors and a plastic protector.
If you are looking for the 110V of the cooling fan. The part number for that item is 15030194. These numbers are identical for the Victoria...
€111.18
Eureka / Nuova Simonelli Mythos burrs original
These original grinding blades can be used on some Eureka and Nuova Simonelli coffee grinders. This item always comes in a Eureka packaging
This specific model grinding blades has a base of tool steel base and over it a Titanium layer applied. This layer of Titanium is much harder then the tool steel and has a low friction coefficient. So these blades...
€256.87
Nuova Simonelli/Victoria Arduino Mythos hopper microswitch
This microswitch is used on Nuova Simonelli and Victoria Arduino Mythos coffee grinders. This switch indicates if the coffee hopper is installed, otherwise the grinder won’t work. The part reference number for this item is 15030002.This microswitch is rated up to 10A at 250V
€19.84
Nuova Simonelli/Victoria Arduino Mythos 1 grinding burr holder
This item is a grinding burr holder, used on the Victoria Arduino and the Nuova Simonelli Mythos one. This item has Nuova Simonelli part reference number 15030097 and the Victoria Arduino part reference number 15030097. This grinding burr holder has been made in Italy
€537.68