On this product page you will find a CPU/electronic board which can be used on a variety of espresso machine models by La Cimbali and Faema. This electronic board has been made in the EU. The dimensions are 125x120mm. This unit can be used on the Cimbali M24, Cimbali M24 Select, Cimbali M22, Cimbali M24, Cimbali M27-2008, Cimbali M29 and the La Cimbali...

The nozzle on this product page can be used on a variety of Faema brewing groups. This nozzle has been made from a male M10 with a thread pitch of 1mm. The hole in the middle is 0,5mm. You can use this gigleur on the Faema Due, Faema E91, Faema E92, Faema E97, Faema E98, Faema Express, Faema E98 president and the Faema Smart.

The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.  Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...

On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE....

The boiler safety valve shown on this page can be used on wide selection of espresso brands such as Brasilia, Wega, Astoria, Grimac, Cimbali, Faema, Marzocco and Carimali. The part references can be found on the extra info tab. This boiler safety valve has a male 3/8” BSP-G thread. The safety valve has been set at 1,8 bar, this is not adjustable. When the...

On this page you will find a clamp on rotation pump. This specific model Compact Plus (MO0154EAADN) has been made by the Italian company Fluid o tech in Italy. This type of coupling is only used with a couple of coffee machine brands, which are all part of the La Cimbali Group. So, you will find them with the espresso machines Casadio, La Cimbali and...

The o ring on this page has a cord diameter of 2,62mm and a internal diameter of 11,91mm and is made from EPDM. This specific model of o rings is mainly used in steam and water valves but can also be used in various brewing groups and boilers. This o ring is used in various steam and water valves of the brands La Carimali, San Remo, Nuova Simonelli, La...

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

The item on this product page is a level regulator board for various la Cimbali and Faema espresso machines. The Cimbali part reference numbers for this item are 535514008 and535-514-008. For Faema the part reference numbers are 3341132863, 3341135935, 535514008 and 903011000. This electronic level board is a 230V version and has been made in...

Level probe 1/4 125mm

Probably the most used pressure switch used on the Asco P302/6 a 3 phase pressure switch. This pressure switch has been used espresso machines like: La Marzocco, Faema, Cimbali, Astoria, Wega, Nuova Simonelli, La Spaziale, San Remo and so on.The brand Asco used to be the company Sirai, since a while this name has changed but the product remains the same....

The anti-vacuum valve on this page is used on various espresso machine models of the La Cimbali group.  This anti depression valve has a variety of part references, these can be found in the extra info tab. This anti vacuum valve has been made from stainless steel. There is also a small cup with it, this is made from brass. The anti-vacuum valve has...