The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.Parker has listed this part under 471012 and 471013
The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6
The valve in question is a 3 way solenoid valve with a flanged connection. This flanged connection is sealed off against a other flat surface with 2 o rings, one for the in and other for the outlet port. The orifice inside this valve has a diameter of 1,5mm and is sealed off with a ruby. The exhaust connection for this valve has a conical 1/8” BSP-G connection.
The maximum working pressure for this solenoid valve is 10 bar. The temperature range for the fluids goes from -40 degree Celsius up to 140 degrees Celsius.
As mentioned earlier this solenoid valve is quite common in brewing group applications. It can be used with brands like: Brasilia, Casadio, Cimbali, Conti, Faema, Grimac, Nuova Simonelli, La Pavoni, Promac, Rancilio, San Marco, La Spaziale, Victoria Arduino and Wega.
The solenoid valve on this product page is one made by the company Lucifer. The coil states Parker, this is the main company. This solenoid valve is used in various La Cimbali and Faema espresso machines.
This solenoid valve is a 2 way valve. The coil used is a 9W 24V model. The hole diameter is 2,5mm and is sealed off with a FKM seal. The maximum...
This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps.
The o ring has a wire diameter of 1,78mm and a internal...
On this product page you will find a 3 way solenoid valve made by the company Lucifer, this part of the company Parker. This solenoid valve can be used on various espresso machine brands such as Cimbali and Faema. The corresponding part references would be for Faema 533892300R and 533892300. For Cimbali 533-892-300R and 533-892-300.
This solenoid valve...
The solenoid valve on this product page is a 2 way solenoid valve which is mainly used on espresso machines of the Cimbali group. You can find this solenoid valve with Faema and Cimbali espresso machines This specific solenoid valve has been made by Lucifer (the valve shows parker, that is the main company) the parker part reference for this item is...
The item on this page is a 3 way solenoid valve made by the brand Lucifer. This item is slightly different, seen it’s not a standard 220/230V model. But it is a 110V model.
This 3 way valve can be used on a variety of espresso machine brands such as Casadio, Brugnetti, San Marco, La Scala, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli, La...
