La San Marco 85 - Motor and pump
La San Marco 85 - Motor and pump
There are 3 products.On the San Marco 85 espresso machines there are a variety of motors and pumps used. Seen there is a version with a internal motor, but also a version with a external motor.
The motor and pumps used on the SM 85 espresso machines are a individual motor with a pump connected to it. As a main motor there is normally a motor used from the Italian brand RPM. On top of this motor is a junction box installed, seen it needs to be placed outside the espresso machine.
The pumps which is used on the San Marco motor is generic clamp on pump. These pumps can be made by brands such as Fluid o tech, Procon and Nuert. Note: always pay attention to the threads on the in and outlet port. Seen those can be NPT or BSP-G.
Nipple 3/8"M x 3/8"NPT M
(0) The fitting on this page is mainly used on espresso machine pumps, which have a 3/8” NPT connection. This type of fitting can be found on espresso machine brands such as Cimbali, Grimac, La Pavoni and Fiorenzato. The Cimbali part references are 532500600 and 532-500-600, for Faema the reference is 532500600, for Fiorenzato and Grimac the...
Exterior RPM motor 300W 220/230V
(0) The espresso machine motor on this page is made by the Italian electric motor manufacturer RPM. This motor is intended to be used as a exterior motor, so that it isn’t installed inside the machine. The motor is a good motor to use with a vintage espresso machine like the Faema E61. Currently this coffee machine motor can be used on a variety of...
Procon clamp ring pump 180 L/H
(0) The rotary vane espresso machine pump. There are various brands which manufacture these pumps like Fluid o tech, Nuert and Procon. The pump on this page is made by the company Procon. Part number 132A060F123B The pump on this page is called a rotary vane clamp pump. The pump is clamped on a flange with a stainless steel clamp. If you tighten this clamp...
