The brewing group on the La Spaziale S1 dream is one of the standard type which you find on more versions of the S1 models. There is no difference in brewing groups between the regular S1 Dream and the tank version of the S1 Dream, the T.
The brewing group on the Spaziale S1 dream is made up out of 2 sections. The brewing group itself and the small boiler in the back. This boiler is fitted with a 800W heating element.
The group head itself is a solenoid operated group head, this is a 115 or a 230V version. On this model the standard Spaziale portafilter gasket is used, with a OD of 64mm and a ID of 52mm. the shower screens are held in place with a small screw which goes true the shower screen holder. The heights can go from 11mm up to 15mm.
The La Spaziale brand uses only 1 type of portafilter on their espresso machines, so with this brand you won’t have the issue that you have a non fitting portafilter. Note: always replace the portafilter gasket.
This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...
The portafilter gasket shown on this page is a OEM/Original La Spaziale spare part. The La Spaziale part reference for this item is 01968. This portafilter gasket has been made from NBR. The outer diameter is 64mm the inner diameter is 52mm and the thickness of this gasket is 6,7mm. You can use this portafilter gasket on Spaziale models such as the...
The hex screw on this page is used in various applications on various brands such as Nuova Simonelli, La Spaziale and Elektra espresso machines. The Elektra part reference is 00361035 and the Spaziale part reference is 00643 This hex screw is a stainless-steel model, with a male M5 thread which has a length of 25mm. This screw has been made...
This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...
The item on this product page is a OEM/Original La Spaziale spare part. This item is a portafilter gasket which can be used in various La Spaziale espresso machines. The La Spaziale part reference for this item is 01939. This gasket has been made from NBR. The outer diameter is 64mm, the inner diameter is 52mm and the thickness is 6,3mm. this gasket does...
This o ring is used in a La Spaziale coffee machine brewing group. This o ring is situated between the flange side boiler (Spaziale part number 01222) and the heat exchanger boiler (Spaziale part number 01236). In a lot of cases there is also used a flat PTFE or fiber gasket instead of the O ring (02417) This gasket is used in a la Spaziale brewing...
The solenoid valve on this page is slightly different then the flanged 3 way solenoid valve. Instead of the traditional brass solenoid valve flange is this one made from stainless steel. This parker 3 way solenoid valve is mainly used as a brewing group solenoid valve. The Parker part number for this item is 3019F1GRG7XS03XS6 and 131FSG100 As mentioned...
Nuova Simonelli single portafilter with torpedo handle
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |