The Mazzer major coffee grinder comes in 2 versions a electronic version and a doser version. On this page you will find the parts for the Doser version of the Mazzer Major. Various parts between these coffee grinders are interchangeable.
The doser version of the Mazzer Major can store a certain amount of ground coffee in the doser on the front of the coffee grinder, the disadvantage of this is that you don’t have such fresh coffee as with the Mazzer Major Electronic.
The coffee beans go from the hopper on the top towards the burrs, note: if you have removed the hopper from the machine the machine won’t work anymore. At the flat grinding burrs, which have a outer diameter of 83mm and a inner diameter of 49mm. After the coffee has been ground it goes towards the doser. The amount of dispensed coffee can be determined by the pull lever on the side. Once you have the coffee out of the doser on the Mazzer Major you can use the tamper which is fitted on the front of the doser.
The Mazzer major doser version is available in various motor configurations, the most common one is the single phase 220/240V versions and also the 110V models. But in some countries the 3 phase models of the Mazzer Major are more common. The advantage of the 3 phase model is that this type doesn’t require a start capacitor with it.
The item on this product page is a OEM/Original Mazzer spare part. This item is a compensation ring used in a Mazzer doser system. The part reference numbers for this item are S000ANA01, S000ANA01/AQQ and S000ANA01/QQQ. This compensation ring has a outer diameter of 32mm and has been made in Italy. This compensation ring can be used on the Mazzer...
The item on this product page is a OEM/Original Mazzer spare part. The part references for this item are S000CRA01, S000CRA02, S000CRA02/AQQ, S00SCRA02 and S00SCRA02/QQQ. This doser pawl has been made from casted and machined brass. This item is used in the doser mechanism of various Mazzer coffee grinders. The item has been made in Italy. This...
The coffee collecting tray on this page is used on a variety of Mazzer coffee grinders. This item is a OEM/Original Mazzer spare part. The Mazzer part references for this item are SMJ0PIB02 and SSJ0PIB02. This coffee collecting tray has been made from pressed stainless steel. The tray has been made in Italy. You can use this stainless-steel tray on the...
The item on this page is a the top dosing star. It is used in the doser machines of Mazzer. This item is a OEM/Original Mazzer spare part. The part references for this item are SMJSSTA04 and SSJSSTA04 This male doser star has been casted and machined afterwards. The outer diameter of this star is 108mm. This upper star has been made in Italy. You can...
The item on this page is a male dosing star. It is used in the doser machines of Mazzer. This item is a OEM/Original Mazzer spare part. The part references for this item are S000STA02, S000STA02/B, S000STA02/BQQ and S000STA02-B. This male doser star has been casted and machined afterwards. This item has been made in Italy. You can use this...
The coffee hopper on this page is a OEM/Original Mazzer coffee grinder spare part. This hopper can be used on the Electronic models as well as on the Doser models. The item has the Mazzer part references of S000CAE03, S00SCAE03 and S00SCAE07. This coffee hopper is complete. The hopper, lid and the connector for installation on the Mazzer coffee...
The grinder adjustment ring on this product page can be used on a variety of Mazzer coffee grinders. This item is a OEM/Original spare part. The part reference is SMJ0GHA04 and SRO0GHA01 This adjustment ring has been made from casted and machined brass which has been nickel and chrome plated. With this adjustment ring you can set the distance...
The item on this product page is a OEM/Original Mazzer spare part. This item is a portafilter filter holder fork. The Mazzer part references for this item are S000FOB13, S000FOB13/QQQ and SMJ0FOB13. This stainless steel portafilter holder has a length of 66mm. The item has been made in Italy. This portafilter fork holder can only be used on the...
The axial fan on this page is used on various Mazzer coffee grinders. The Mazzer part references for this item are S00SVEB01 and S00SVEB03. This axial fan is the EBM 612NGH. This fan is a 12Vdc 2,6W and runs at 5600rpdm. The outer dimensions are 60x60mm and the thickness is 25mm. This fan has been made in china. You can use this axial fan on the...
The timer knob on this product page is a OEM/Original Mazzer spare part. The Mazzer part reference for this item are S000MAB01 and S000MAB01/QQQ. With this switch knob you control the timer of 50 seconds, which is available in a single or 3 phase version. This switch knob has been made in Italy. You can use this switch knob on the Mazzer M100,...
Contactor 3 phase AC3 9A 4Kw (400V) coil 220-380V 50/60Hz
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |