ECM Mechanika IV Profi - Boiler
ECM Mechanika IV Profi - Boiler
There are 9 products.ECM Mechanika IV Profi espresso machine parts boiler
Bezzera pump manometer 40mm 0-16bar
(0) On this product page you will find a pump pressure gauge which can be used with various brands such as Bezzera and ECM Heidelberg. The part reference for Bezzera is 7432523 and for ECM Heidelberg is B7432517 This pump pressure gauge goes from 0 to 16 bar. The case of this manometer has a diameter of 39mm, the frame is 44mm. The connection...
Pressure switch XP110 0.5 - 1.2 Bar 1/4g...
(0) The Ma-Ter XP 110 125 pressure switch. One of the most used pressure switch models. You can find these switches on some Commercial espresso machines but they are mainly used on Domestic espresso machines. For instande on the Elektra Microcasa. Isomac Millenium, Isomac Mondiale and the La Pavoni Pub. The thread used a ¼” BSP-G(this is the...
Safety valve 3/8" 2.0 bar CE PED IV certified
(0) The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high. This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0...
Level probe 1/4 80mm
(0) The item on this page is a boiler level probe. This specific model of level probe can be found on various Rocket espresso machine models. The Rocket part reference for this item is C199900839 This level probe has been made up out various components. The probe itself is made from stainless steel and has a length of 80mm, this is sealed of with a PTFE...
Water drawing tube 1/8"M - 1/4" M
(0) The item on this product page is a water drawing tube and is a OEM/Original Rocket spare part. The Rocket part reference for this item is C229900393. This water drawing tube has a length of 91mm and the tube diameter is 6mm. The fitting itself has 2 types of thread. A male 1/8”BSP-G and a ¼” BSP-G This water drawing tube can be used...
Anti vacuum valve V.A.R. 1/4"
(0) On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE....
Contact thermostat 135°C M4 16A 250V
(0) The item on this product page is a contact thermostat. This model of thermostat can be used on various brands such as ECM and ECM Heidelberg. The part references are for ECM C199901550 and for ECM Heidelberg C199901550 This contact thermostat is rated on 135 degree Celsius. The max amps for this thermostat is 16A at 250V. Once the thermostat...
O ring gasket epdm 5,34x37,47mm
(0) The o ring on this product page is used as a heating element o ring on various ECM Heidelberg espresso machine models. The o ring has a ECM Heidelberg part reference number of P9013. This o ring is made from EPDM. The internal diameter is 37,47mm and the cord diameter is 5,34mm. This o ring has been made in Italy. You can use this O ring on the ECM...
ECM capillary tubing 1/8"FF
(0) The item on this page is a capillary tube used for attaching a manometer to a boiler. This model of Capillary tubing can be used on various ECM Heidelberg espresso machines. The ECM Heidelberg part reference number is P6051 This copper capillary tubing has on each side a female 1/8” fitting. This item has been made in Italy. You can use this...
