This brass casted boiler fitting is used on the bottom side of the heat exchanger (HX) of the espresso machine boiler. It attaches to the HX with a ½”male flat sided connection. The other ½”pipe connection is for the return pipe from the brewing group. The ¼”female thread on the bottom is for the injector tube. In...
The top HX boiler fitting, a generic item you will find with a lot of espresso machine brands. This ranges from Vibiemme, Grimac, Pavoni, La Scala to Expobar, Brasilia and BFC. This specific item is a casted brass fitting. The side which is screwed into the HX is a ½”BSP-g and the side where the tube to the brewing group goes to is also a...
The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high. This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0...
On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE....
The level probe on this page can be used on a variety of espresso machines. You can use this level probes on brands such as La Scala, Grimac, Faema, Astoria, La Pavoni, Wega and Rancilio. This level probe has been made from stainless steel. The insulator is made from PTFE. The fitting is a male ¼” BSP-G thread. The overall length of this...
The level probe on this page is made by the Italian company Gicar. This level probe is used in a variety of espresso machines such as San Remo, Grimac and Astoria. The Astoria reference is 20258, the Grimac reference is GR212 and the San Remo part reference is 10112042. The Gicar part reference for this item is 9.0.81.02G The level probe shown on...
The boiler safety valve shown on this page can mainly be found on La Pavoni espresso machine boilers. The La Pavoni part reference for this item is 395221G This boiler safety valve has a male 3/8” BSP-G thread. The pre-set pressure is 1,8 bar and nonadjustable. The seal used is a FKM seal, when opened the steam outlet is 872 L/M. This valve is CE...
The heating element on this page is suitable for a 3 group Grimac espresso machine. The Grimac part reference of this heating element is 1240100129-GRT103. This heating element is 4500W at 230V. The element has a 4 pole connection. The immersed length of the element is 345mm. This element is a screw in element and has a 1”1/4 flange. The suitable...
On this product page you will find a heating element which can be used on a variety of 2 group Grimac espresso machines. The Grimac part reference for this item is 1240100127-GRC102 This heating element produces 3300W at 230V with 4 connecting poles. The immersed length is 230mm. this element is a screw in element and has a flange of 1”1/4....
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |