Astoria Divina - Water inlet
Astoria Divina - Water inlet
There are 12 products.On the Astoria Divina espresso machine you have 2 types of water inlets. The main one is a solenoid operated valve, the backup one is a manual operated valve.
The manual operated valve is used in the case that the water inlet solenoid valve is broken/blocked or any other reason the boiler can’t be filled from the water mains. This water inlet valve is operated by pushing a pin inward the valve body. This pin pushes a gasket holder inwards, which makes it possible for the water to flow into the boiler.
The solenoid operated valve is installed in the hydraulic system of the Divina. This valve is controlled with the level regulator/dosing device. Once the level probe detects that the water level is too low, the valve opens and the boiler will fill to the required level. Once the level probe is reached, the valve will close automatically.
Copper gasket 18x14x1.5mm 1/4"
(0) The flat copper gasket on this product page can be used with a variety of espresso machines and on various applications. You can use this copper gasket on espresso machines such as Marzocco, Casadio, ECM Heidelberg, La Scala, La Cimbali, Faema, Astoria, Wega, Nuova Simonelli, Wega and Rancilio. You will mainly see the use of this copper gasket to seal...
Filling valve shaft 8x35.6mm
(0) The item on this product page is a OEM/Original Astoria/Wega spare part. This item is the water inlet pin, used on various models. The Astoria part reference for this item is 25315 and the Wega part reference is W10550 and WY25315 This stainless steel pin has a outer diameter of 8mm and a overall length of 35.6mm. You can use this pin on...
Astoria wega water inlet tap piston
(0) The item on this product page is a OEM/Original Astoria CMA spare part. This item is used with Astoria and Wega espresso machines. The part reference for this item is for Astoria 25615 and for Wega W10546 and WY25615. This item has been machined from brass and it is made to hold the flat sealing gasket. You can use this inlet gasket...
Spring 14x45mm
(0) The compression spring on this product page is used on various water inlet systems of Astoria CMA espresso machines. You will find this spring with the brands Astoria and Wega. The part references for Astoria are 10451 and for Wega W10545/WY10451. This stainless steel spring has a outer diameter of 14mm and a overall length of 45mm. You can use...
Astoria Wega tap gasket 14x7x5mm
(0) The item on this product page is a lip seal which is used on a water inlet system. You can find this lip seal with various Astoria and Wega espresso machines. The Astoria part reference for this item is 12205 and the Wega part references are W10527 and WY12205. This lip seal is used to seal off the manual filling shaft. The outer diameter is...
Male plug 1/4"
(0) One of the most universal items. The male brass plug. The plus on this page can be found in the catalogue of a variety of espresso machine manufacturers like Astoria, Faema, La Spaziale and Wega. This specific plug has a male ¼”BSP-G thread. The height of this plug is 13 mm and the wrench size for this plug is 17mm.
L Fitting brass 3/8"M x 1/4"M
(0) The fitting on this product page is one from the L type, seen it has a 90 degree bend. L fitting can be found on the water inlets on Astoria CMA espresso machines. Such as Astoria and Wega. This L fitting has been made from casted brass and machined afterwards. The brass has been provided with nickel. One side has a male ¼” BSP-G and the...
IMS filter basket removal tool
(0) When you want to clean your portafilter at the end of the day you need to remove the filter basket from the portafilter. But these baskets are normally held in place with the internal spring and can be difficult to remove. Instead of removing the basket with a spoon IMS Filtri has made a filter basket removal tool. This tool is made from stainless...
Astoria Wega gasket 15x4x4mm
(0) This product is a flat EPDM gasket used in steam and water valves and water inlet valves of the Astoria CMA group. So you will find them in Astoria and Wega espresso machines. The Astoria part number for this item is 12203 and the Wega part number is WY12203. This gasket has been made from EPDM. The outer diameter of this gasket is 15mm. the inner...
Brass half nut 3/8" 21x6mm
(0) Brass fittings used on espresso machines are generic items, seen they are used in quite a lot of coffee machines. This specific model is a nut with a 3/8” BSP-G thread with a height of 6mm. The wrench size used for this item is a 21. Which models use this 3/8” BSP-G nut.? Well you can find this nut with brands like: Gaggia, Saeco, Victoria...
