Faema 加热元件 1组 1800W 230V
13-120-L-1755102
>78,06 € 含增值稅64,51 €不含增值稅
含税
規格
在此产品页面上，您会发现一个稍大的单组加热元件。 与老式 Faema 浓缩咖啡机中使用的标准加热元件相比，该元件稍长且容量更大。 注意：此加热元件并不总是适合作为 1 组 Faema 加热元件的升级。 始终检查原始加热元件的长度。
该加热元件在 220V 时产生 1800W 的功率。 该元件有 4 根连接线。 发热体浸入长度为240mm。 所用法兰的宽度为 96 毫米，高度为 58 毫米。 螺栓孔之间的距离为75mm。
您可以在此加热元件上使用的垫圈外径为 57 毫米，内径为 43 毫米，厚度为 3 毫米。
该加热元件可用于各种 Faema 锅炉，例如 Faema E61、Faema P4、Faema P6、Faema E64 和 Faema E66。
Extra Info
| 水下长度 | 240mm |
| 电压 | 220V |
| 瓦 | 1800W |
| Faema | E61, E64, E66, P4 |
| 牌 | Faema |
Reviews (0)
No customer reviews for the moment.
Frequently Asked Questions
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.
配件
AFM 34 加热元件垫片 57x43x3mm
(0) 
