13-001-L-1755278
>69,77 € 含增值稅57,66 €不含增值稅
含税
規格
在此页面上,您将找到适用于 Vibiemme Domobar Junior 和 Vibiemme Domobar Super (ELETRESD12230) 的浓缩咖啡机加热元件。
这种特定的加热元件在 50/60Hz 时提供 1200W 和 230V 的功率。此特定型号上的连接有 2 个支脚,均带有 6,3x0,8 毫米公接头。元件本身由铜制成,法兰是铸造的黄铜,上面有螺纹。螺纹部分的直径为 1”。发热体浸入长度95mm
适用于此 Vibiemme Domobar 加热元件的加热元件垫圈类型的尺寸为 41x33x3mm 或 42x33x3mm。
我们总是建议从锅炉上拆下原来的加热元件,并验证我们提供的技术数据的尺寸。
Extra Info
水下长度 | 95mm |
电压 | 230V |
瓦 | 1200W |
Vibiemme | Domobar Junior, Domobar Super |
牌 | Vibiemme |
零件号 | Vibiemme ELETRESD12230 |
Reviews (0)
No customer reviews for the moment.
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
We would not advice to do so, seen the capacity is too little to proper function in a bar or a restaurant. For a small office this espresso machine would be a good solution, as well as the use in a kitchen.
Well this does depend on how old your Bezzera BZ10 is. Seen you have 2 model versions. There is a pre- 26-06-2010 and a post 27-05-2010 version. The older type is in it’s original configuration isn’t available anymore, for this is a relay rebuild kit available which is the same as the new model.
This model of Bezzera espresso machine is fitted with a solenoid operated Bezzera ring brewing group, so it hasn’t been fitted with a E61 style of brewing group.
The Bezzera BZ10 espresso machine is fitted with a water tank, from this tank the water is pumped, with a Ulka vibration pump, towards the brewing group and into the boiler. So you won’t be able to fit a main water connection to this espresso machine.
The Bezzera BZ10 has been fitted with a double scale pressure gauge, or manometer. So you will see 2 needles, one is for the pump pressure and the other is for the boiler pressure. The boiler pressure goes from 0 up to 3 bar and the pump pressure goes from 0 up to 16 bar.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |