Bezzera BZ07/BZ10 压力开关套件 230V
50-701-L-5051043
>189,80 € 含增值稅156,86 €不含增值稅
含税
規格
此页面上的项目是 OEM/原装 Bezzera 电子套件，适用于各种老式国产 Bezzera 浓缩咖啡机。 此项目的 Bezzera 零件参考号是 7433017R。
该套件由 3 个部件组成，接线器、继电器和压力开关。 压力开关是 Ma-ter C110P，已设置为 2.3bar，在 250V 时额定电流高达 15A。 该继电器是 Finder 继电器，编号为 628282300000，该继电器在 250V 时的额定电流也高达 16A。 这套是意大利制造的。
该压力开关套件可用于 Bezzera BZ07 和 Bezzera BZ10。 注意：对于 BZ07 和 BZ10，此套件可使用至 26-05-2010
Extra Info
| Bezzera | BZ10, BZ07 |
| 电器类型 | 继电器 |
| 类型部分 | 压力开关 |
| 牌 | Bezzera |
| 零件号 | Bezzera 7433017R |
| 类型 | 原来的 |
| 制造国 | Made in Italy |
Reviews (0)
No customer reviews for the moment.
Frequently Asked Questions
We would not advice to do so, seen the capacity is too little to proper function in a bar or a restaurant. For a small office this espresso machine would be a good solution, as well as the use in a kitchen.
Well this does depend on how old your Bezzera BZ10 is. Seen you have 2 model versions. There is a pre- 26-06-2010 and a post 27-05-2010 version. The older type is in it’s original configuration isn’t available anymore, for this is a relay rebuild kit available which is the same as the new model.
This model of Bezzera espresso machine is fitted with a solenoid operated Bezzera ring brewing group, so it hasn’t been fitted with a E61 style of brewing group.
The Bezzera BZ10 espresso machine is fitted with a water tank, from this tank the water is pumped, with a Ulka vibration pump, towards the brewing group and into the boiler. So you won’t be able to fit a main water connection to this espresso machine.
The Bezzera BZ10 has been fitted with a double scale pressure gauge, or manometer. So you will see 2 needles, one is for the pump pressure and the other is for the boiler pressure. The boiler pressure goes from 0 up to 3 bar and the pump pressure goes from 0 up to 16 bar.
