The Astoria CMA brand is one of the few brands which use a specific type of motor on their espresso machines, a water cooled motor. This is also the case with the Astoria Divina espresso machine. Note: there is also a external motor available.
The water cooled engine is made by the Italian company RPM. This motor is available in a 120V and a 230V version. The 120V model produces 310W and the 230V 330W. The water cooling of this motor is done by wrapping a copper tube around the body of the motor. The water passing this motor goes to the water inlet.
The external motor is also a motor made by RPM. This motor is a 120V or a 220/230V model and produces 262W. On the outside is a junction box installed, so that you can wire your cables in a protective box.
Both these models of pumps are fitted with a clamp on ring for the espresso machine pump. But with Astoria espresso machines you always have a coupling set. These are spacers between the pump and motor. So this assembly requires 2 stainless steel clamps.
You can fit a variety of pump brands on these pumps, but they do need to be clamp on pumps. These can be from brands such as Fluid o tech, Procon and Nuert. They need to produce around 180/200 L/H.
The item on this page is a espresso machine pump filter. Not suitable for a vibration pump. This item can be used on basically every espresso machine pump which has a 3/8” BSP-G Thread. But you will see this type of pump filter on Astoria and Wega espresso machines. The part number 56116 for Astoria and for Wega the number WY56116. This filter has...
This RPM motor pump(model number C042204) is one of the more uncommon espresso machine pumps used. The cooling of this motor occurs by running the water which comes out of the pump true the motor to cool it down. This type of coffee machine pump is only used by the Astoria CMA group, so you would only see them on Astoria CMA and Wega espresso machines....
The rotary vane espresso machine pump. There are various brands which manufacture these pumps like Fluid o tech, Nuert and Procon. The pump on this page is made by the company Procon. Part number 132A060F123B The pump on this page is called a rotary vane clamp pump. The pump is clamped on a flange with a stainless steel clamp. If you tighten this clamp...
On this product page you will find a brass espresso machine pump. This pump can be used on espresso machine brands such as Astoria and Wega. The part references for this rotation pump is for Astoria 26303 and for Wega WY26303 This rotary vane espresso machine pump has been made by the Italian company Fluid o Tech. This model is a clamp on...
The rotation pump on this page is made by the Italian manufacturer Fluid o tech, the pump type is designated as model “Standard” with the Fluid o tech manufacturer code: PA0104AGANN0000 This model of rotation pump is a clamp ring type. The pump face and motor face are pushed against each other and a stainless-steel clamp is place around it....
The product on this page is a set of individual components which are used for coupling a espresso machine pump to a motor. This specific model is a OEM/Original Astoria CMA part. The Astoria part number for this item is 83260016R and the Wega part number is WY83260016R This set consists of a stainless steel motor to pump coupling. A shaft...
This motor by RPM is a more uncommon type of espresso machine pump motor(model C042300). It is a clamp ring pump motor, but the water entering the machine is also used to cool the motor. This motor is only used by the Astoria CMA group, so by Astoria and Wega. This specific model has 310W 110/120V with 50/60Hz. To start the motor it uses a capacitor of...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |