Fluid o tech clamp ring pump 100 L/H

The rotation pump on this page is made by the Italian manufacturer Fluid o tech, the pump type is designated as model “Standard” with the Fluid o tech manufacturer code: PA0104AGANN0000

This model of rotation pump is a clamp ring type. The pump face and motor face are pushed against each other and a stainless-steel clamp is place around it. This clamp is tightened with a screw. This holds to pump in the proper location.

This specific pump has a flow rate of 100 L/H and is equipped with a balanced bypass. If you want to change the pump pressure. You need to untighten the black plastic hex so that you can screw the hex with screw slit in or out. If you screw the hex inwards the pump pressure increases and if you screw it outwards the pump pressure decreases.

The pump is self is NSF approved. If you want to connect hoses to the pump you first need to install fittings. These fittings need to be 3/8” BSP-G. The overall length of the pump, without the shaft, is 82,5mm. The shaft used on this espresso machine is a standard square type.