Conti 加热元件 1 gr 2800/3050W 230/240 V
€83.90不含税
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
在此产品页面上,您将找到用于 Conti 浓缩咖啡机锅炉的加热元件。 此特定型号适用于 1-2 组浓缩咖啡机。 此项目的参考 Conti 部件号为 1755392。
该加热元件以 230/240V 产生 2800/3050W 的功率。 有6个接线柱。 元件的浸入长度为175mm。 法兰的外径为 110mm。 螺栓孔之间的距离为67mm。
你需要的这个加热元件的垫片外径为76mm,内径为68mm,厚度为3mm。
该元件适用于 Conti 的旧型号,例如 Conti Mk10、Conti Mk12 和 Conti Classica。
详细信息
- Conti
- Classica
Mk10
Mk12 - 水下长度
- 175mm
- 牌
- Conti
- 瓦
- 2800/3050W
- 电压
- 230/240V
- 类型部分
- 加热元件
- 零件号
- Conti 1755392
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
首先是加热元件的法兰,由于法兰型号的不同,这些加热元件在大多数情况下是不能互换的。另一个重要特征是加热元件的长度。如果太长,就无法安装。如果加热元件太短,锅炉中的热量分布就会不均匀。
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.