Faema 加热元件 4组 5000W 230V

This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website

Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.

Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.

To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.

答案很简单, 原来的阀门是后续的 当你向内转动时 阀门会推出一个垫口 蒸汽可以出去,再次关闭,没有蒸汽可以出去. 以现代的E61阀为例,垫口持器后方是带有弹簧的小不锈钢球.

从Faema E61酿酒组开始,酿酒组内部安装的零件基本上没有区别. 阀门垫、弹簧、阀门组件和阀门过滤器等部件均保持不变。 最大的变化是酿酒集团前身的小清洗洞. 这个洞没有最早的模型

Faema E61 espresso机上使用的锅炉有5种. 最出名的是双花花型. 一边是取暖元素法兰克 另一边是水位法兰克 两者都停产了 这些用铝制锅炉环来保存。 对于单组,你有一个锅炉 有一面的花纹。

后一种型号为不锈钢锅炉,并有1个花纹. 这种类型的锅炉较不常见,然后是上面的铜锅炉. 还有后来的不锈钢模型, 这两个锅炉都有腐蚀问题,这都因为不锈钢.

最新的型号也是一种铜锅炉,这种锅炉中间有一个单热交换器(HX). 大多数现代的咖啡机对每个个体酿造组都有一个单独的HX.

是的,但这取决于各种因素。 首先是经验,这是手动操作的咖啡机, 它需要更多的关注 从酒吧,然后一个Solenoid操作模型。 你需要手动停止酿造过程. 如果你没有这种经验, 你可能无法忍受这样的酒吧所需要的节奏。 然后,我建议去Faema E61禧年, 这是Solenoid操作版本的 Faema E61 Legend espresso机器。

A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.