Grimac G11加热元件3500W 230V
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
在此页面上,您将找到适用于 Grimac 浓缩咖啡机的加热元件。 这种特定的加热元件适用于 2 组浓缩咖啡机,并且具有 Grimac 参考号 A2100031
该元件在 230V 下产生 3500W。 该元件有 6 个连接极。 法兰中间是加热元件恒温器的备用管。 元件浸入长度为300mm。 法兰长95mm,宽57mm。
用于该元件的加热元件垫圈外径为57mm,内径为43mm,厚度为3mm。
您会在 Grimac G11 上找到这个加热元件
详细信息
- 水下长度
- 300mm
- 电压
- 230V
- 瓦
- 3500W
- Grimac
- G11
- 类型部分
- 加热元件
- 牌
- Grimac
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.