Gaggia Baby Classic

The portafilter gasket on this page can be used on various commercial Gaggia espresso machine brewing groups. The Gaggia part reference for this item is WGANG01/001/B. This portafilter gasket has been made from NBR. The outer diameter is 72mm the inner diameter is 56mm and the thickness is 8,5mm. This gasket can be used on various brewing groups used...

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

The item on this product page is a 3 way solenoid valve. This solenoid valve can be used on various domestic Gaggia espresso machines. The Gaggia part references for this item are DM1152/001, DM1152/003 and DM1645/001. The Olab part reference number is DIS.6126/L. This 3 way solenoid valve is a flanged version, but this one is different. Seen it has...

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

The product on this page is a Allen head screw for attaching a solenoid valve to a other surface. This type is a M4x10mm. It is a stainless-steel bolt according to UNI 5931 - DIN 912 - ISO 4762 You will only need this type of Allen head screw to attach the flanged solenoid valves to a flat surface. This type of Allen screw is used in a lot of espresso...

The shower screen on this page can only be used on various domestic Gaggia espresso machines.  This shower screen has been made by the Italian company IMS Filtri, the part reference for this item is RCDE190. For this item is no Gaggia part reference number available. This shower screen has been made from stainless steel. The outer diameter of this...

The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...

The boiler/heating element on this page is a OEM/Original Gaggia espresso machine spare part. This is a boiler hand heating element in 1 and can run on 120 and 220/240V. The original part reference for this item is EF0030/02/A and EF0030/A. The heating element in this boiler produces between 570/680W at 120 and 220/240V. This boiler has been made in...

The filterbasket shown on this product page is a 2 coffee filterbasket suitable solely for a variety of Gaggia espresso machines. Domestic and commercial espresso models. This filter basket has been made by the Italian company IMS Filtri. The part reference for this basket from IMS is GA2T183. Note: this is not a competition basket. This stainless-steel...

The thermostat on this page is a thermostat used on various domestic espresso machines. You can find this thermostat on various model of Gaggia and Brasilia. The part reference for Brasilia is 08702.2.00.08 and 0870220008. For Gaggia the part reference is DM1288 and DM1288/K  This contact thermostat is a automatic model. The thermostat goes to 145 degree...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

Ulka espresso machine vibration Pump EP5 230V