Filter by
Type part
more... less
Type
Price
Filter

La Pavoni BAR T parts

The La Pavoni Bar T is one of the most iconic La Pavoni espresso machines ever build. This model has been aesthetically the same for decades. The La Pavoni Bar T is made in 3 configurations

La Pavoni Bar T L,

La Pavoni Bar T M

La Pavoni Bar T V

The La Pavoni Bar T L is the lever brewing group of the La Pavoni Bar T. This espresso machine is made in 2 types a 2 group version and a 3 group version.

The La Pavoni Bar T M is the manual version of the La Pavoni Bar T. This espresso machine is non volumetric espresso machine. So the brewing process is started by pushing a button and is stopped by pressing the same button.

The La Pavoni Bar T V is de automatic volumetric version of the La Pavoni Bar T. With this model of the Pavoni Bar T you can choose pre-set volumetric doses for each individual brewing group.

If you are not entirely sure which parts you need for your La Pavoni Bar T espresso machine, don’t hesitate and send us a message.

La Pavoni BAR T espresso machine parts

La Pavoni BAR T parts

Portafilter gasket 73x57x8mm

The portafilter gasket on this page can be used on various espresso machine models such as ECM Heidelberg, La Pavoni, Rocket and Wega. The part references for this item are for La Pavoni 361014, for ECM Heidelberg C449900229 , for Rocket C449900229 and for Wega W10321/ WY12227  This portafilter gasket has been made from NBR with shore 75....
€3.15

Spring for steam and water valve 10,5x32mm

This steam and water valve compression spring is one of the most used compression springs. You will find them with a variety of espresso machine brands such as Faema, Pavoni, La Scala, Vibiemme, la Marzocco and San Remo. The part references can be found in the extra info tab. This stainless-steel compression spring has a outer diameter of 10,5mm and a...
€1.10

Level probe 125mm 1/4"

The level probe on this page is used with a variety of espresso machine brands. Such as Brasilia, Gaggia and La Pavoni. The Brasilia part reference for this item is 00649.4.00.08, the Gaggia part reference is WGADM1935 and the La Pavoni part reference is 438023. This stainless-steel level probe has a PTFE insulator. The inner fitting is a 1/8”...
€12.14

La Pavoni/Gaggia spring 12x22mm

The compression spring on this page can be used on a variety of espresso machine brands such as La Pavoni and Gaggia. This compression spring is mainly used in a steam and water valve. The La Pavoni part reference is 311409 and the Gaggia part reference is WGARB0882  This stainless steel compression spring has a outer diameter of 12mm and a...
€3.95

Steam and water valve spring bushing

The steam valve bushing on this page is used in one of the most common steam and water valves used. This item can be used with brands such as Marzocco, La Carimali, San Remo, La Scala, Faema, La Pavoni and BFC. Against this brass bushing seats a valve shaft spring. This bushing pushes against 2 o rings which seal off the steam valve shaft. This bushing...
€1.00

Gicar level regulator NRL30/1E/2C/F 230V

This Gicar level regulator is one of the most simple and common level regulators you will find. This model has the current Gicar code of 9.1.40.71G. there are a lot more product codes, you can find those in the extra info tab. This Gicar level regulator has the name NRL30/1E-2C/F and runs on 230Vac. You can find this level regulator on various espresso...
€69.44

Gaggia/Pavoni group locking gasket 73x61x1mm

The group locking gasket shown on this page can be used on various brewing groups of Gaggia and La Pavoni espresso machines. The Gaggia part reference for this item is WGA4001084000 and the La Pavoni part reference for this item is 361016. This group locking gasket has been made from a fibre material. The length of this group locking gasket is 73mm...
€5.01

Gicar flowmeter 1/8" 1,15mm connector with led

On this page you will find a flowmeter made by the Italian company Gicar. This specific model of flowmeter can be used with a variety of brands such as San Remo, La Cimbali, Nuova Simonelli and Brasilia. The Gicar part numbers for this item are (9.0.25.50G, 9.0.96.50G and 9.0.55.50G) The fittings which can be used on the in and outlet of flowmeter are...
€60.67

Procon clamp ring pump 180 L/H

The rotary vane espresso machine pump. There are various brands which manufacture these pumps like Fluid o tech, Nuert and Procon. The pump on this page is made by the company Procon. Part number 132A060F123B The pump on this page is called a rotary vane clamp pump. The pump is clamped on a flange with a stainless steel clamp. If you tighten this clamp...
€179.36

Gaggia heating element gasket

the heating element gasket on this product page can be used on various Gaggia and La Pavoni heating elements. The compatible part reference number for Gaggia is4027001000. This heating element gasket can be used on the heating elements used on the Gaggia Deco, Gaggia GE, Gaggia GD, Gaggia LC/D, Gaggia XE, Pavoni Bar, Pavoni Bart, Pavoni P tre, Pavoni P...
€4.90

La Pavoni steam cap knob

The item on this page is a OEM/original La Pavoni spare part. This item is a steam valve knob insert. The part reference number of la Pavoni for this item is 37102101. This valve knob insert has been made from plastic with a silk screen image. This valve knob insert works in combination with valve knob 2711014. This valve knob insert has been made in...
€15.45

Filterbasket spring 1,0mm 3 sides straight

To hold a coffee filterbasket in it’s place there is always a spring installed in the portafilter. In each modern portafilter is a recess machines to accommodate such a spring. The type on this product page can be used on brands such as Carimali, Casadio, San Marco, San Remo, Vibiemme, Bezzera, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli,...
€0.82