32.09 € بدون ضرائب.
Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)
This adjustable bypass is used in the Vibiemme Domobar and a variety of other versions of the Vibiemme Domobar Super. With the parts numbers: ASSBYPASSNEW and ASSBYPASS. This adjustable bypass connects to the internal Ulka vibrations pump. This bypass has a connection in of male 1/8” BSP and the outlet fitting is a 1/8” BSP Female. There is also a exhaust port, you can connect a silicone drain hose to that fitting.
If you are not sure if this Vibiemme adjusted bypass fit’s your Vibiemme espresso machine, just send us a message and we might be able to help you.
البيانات
We would not advice to do so, seen the capacity is too little to proper function in a bar or a restaurant. For a small office this espresso machine would be a good solution, as well as the use in a kitchen.
Well this does depend on how old your Bezzera BZ10 is. Seen you have 2 model versions. There is a pre- 26-06-2010 and a post 27-05-2010 version. The older type is in it’s original configuration isn’t available anymore, for this is a relay rebuild kit available which is the same as the new model.
This model of Bezzera espresso machine is fitted with a solenoid operated Bezzera ring brewing group, so it hasn’t been fitted with a E61 style of brewing group.
The Bezzera BZ10 espresso machine is fitted with a water tank, from this tank the water is pumped, with a Ulka vibration pump, towards the brewing group and into the boiler. So you won’t be able to fit a main water connection to this espresso machine.
The Bezzera BZ10 has been fitted with a double scale pressure gauge, or manometer. So you will see 2 needles, one is for the pump pressure and the other is for the boiler pressure. The boiler pressure goes from 0 up to 3 bar and the pump pressure goes from 0 up to 16 bar.
