0
عربة التسوق الخاصة بي
Faema E92 boiler temperature probe
36.04 €
29.79 € بدون ضرائب.
Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)
The boiler temperature sensor/probe on this page can be used on various Faema espresso machines. The Faema part reference for this sensor is 3761132007.
This temperature probe has a male ½” fitting. The bulb itself has a diameter of 10mm and a length of 36mm. This sensor has been made in Italy.
You can use this temperature probe on various espresso Faema Models such as the Faema E91, Faema E92, Faema E97, Faema E98, Faema Smart and the Faema Compact.
02-021-L-1444501
البيانات
- فايما
- Compact
E91
E92
E97
E98
Smart - اكتب الجزء
- Temperature probe
- ماركة
- Faema
- رقم القطعة
- Faema 3761132007
- بلد التصنيع
- Made in Italy
التعليقات (0)
لا يوجد تعليقات عملاء هذه اللحظه.
8 غيرها من المنتجات
بئر نصف جوز 3/8
This brass nut has a female thread of 3/8” bsp and a height of 6mm. The outer size is 21 or 24mm, this can vary sometimes and can’t be selected. So where is this brass hex nut used in espresso machines? You can find this model hex nut mainly on water and steam taps of brands like, Royal, La Spaziale, La Scala, Nuova Simonelli, Victoria...
2.62 €
زنبرك سلة المرشح 1،3 مم 3 جوانب
To hold a coffee filterbasket in it’s place there is always a spring installed in the portafilter. In each modern portafilter is a recess machines to accommodate such a spring. The type on this product page can be used on brands such as Casadio, Carimali, Scala, Cimbali and Rancilio. This spring is made from stainless steel. The cord diameter is...
0.90 €
موصل صمام الملف اللولبي
The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...
2.77 €
Vibiemme فوهة رش المجموعة 21mm m6x1ملم
The spray nozzle on this product page does look one which is common, but the thread size on this model is only used on various Vibiemme espresso machines. The VBM part reference number for this spray nozzle is RACCSPGRKO The item itself is made from machined brass and has a diameter of 21mm. The thread on this item is a male M6 thread with a pitch...
5.29 €
Mazzer أزرار الضغط في جهاز الجرعة
The commercial Electronic coffee grinders Made by Mazzer are controlled with a keypad which is located on top of the dosing funnel. This circuit board has the 3 push buttons and the electronic display on it. This specific model of circuit board is used with the coffee grinders: Mazzer Super Jolly Electronic, Mazzer Major Electronic, Mazzer Kony...
271.90 €
لوحة اللمس 5 أزرار 1 LED
On this product page you will find a touchpanel membrane in a plastic housing suitable for the Vibiemme Kometa espresso machine. The Vibiemme part reference of this item is ELETPUL1LEDKO. The part reference of the manufacturer, Gicar, is 9.9.09.38G This touchpad is suitable for Vibiemme Kometa which uses flowmeter, so it is a machine which uses volume...
175.89 €
خاتم 3.69x1.78mm FKM
The item on this product page is one of the smaller sizes of o rings. This o ring can be used with various brands such as La Spaziale, La Scala, Carimali, Gaggia and La Pavoni. This o ring has been made from the gasket material FKM. The cord diameter of this o ring is 1,78mm and the internal diameter is 3,69mm. This o ring has been made in Italy. You...
0.42 €