في بعض الحالات ، يتم ربط شاشة الاستحمام بمسمار ، في معظم الحالات يكون هذا مسمار فيليبس أو مسمار مقفل. من الصعب إزالته بمفك عادي بسبب الارتفاع المحدود تحت مجموعة الشرب. ولكن من أجل ذلك تحتاج إلى مفك المسامير المختصرة، في هذه الحالة من العلامة التجارية الألمانية Wera، والتي تناسب بشكل جيد تحت مجموعة البيرة بحيث يكون من السهل فك المسامير وأنها لا تنزلق. مفك...

The drain valve on this page can be used on various E61 style of brewing groups. Models such as ECm, ECM Heidelberg, La Pavoni, Rocket and Vibiemme espresso machines. Not on the Faema E61 This drain valve has been machined from a single piece of brass. After that it has been polished, nickel plated and finally chrome plated. This item is made in Italy....

The o ring on this product page can be used on a variety of espresso machine brands and in various applications. You can find this o ring on brands such as ECM Heidelberg, La Scala, Bezzera, Cimbali, Grimac, La Spaziale, Brasilia and Gaggia. With applications such as water and steam valves and on brewing groups. The part references codes can be found in...

This stainless steel compression spring with the dimensions of 15x25mm is normally used as a camme spring on a Faema E61 brewing group or on E61 style brewing groups.  Like with the Faema E61, Faema E61 legend, Grimac, Isomac, Pavoni, Wega and a variety of other brands which use a e61 style of brewing group. Besides that option, this model...

The item on this product page is the upper drain sleeve. This drain sleeve can be used with a wide selection of E61 brewing groups. Such as with the brand Faema, ECM, ECM Heidelberg, Isomac, Pavoni, Rocket and San Remo. This drain sleeve has been made from machined brass. This has been afterwards been nickel and chrome plated. The fitting on the inside...

This a universal Polytetrafluoroethylene (PTFE) gasket with 22x16x2mm. The gasket is used on a variety of espresso machine components. This type of gasket found boilers, brewing group and valve assemblies. The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera,...

The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...

The item on this product page is a spring guide bushing used on various E61 Style of brewing groups. You can use this item with brands such as ECM Heidelberg, La Scala, Bezzera, Isomac, Pavoni and Brasilia. The Bezzera part reference is 7479942, the Brasilia part reference number is 13657.0.00.04, for ECM Heidelberg it is B7479942, for Isomac ISBUS313116...

The drain valve disc on this product page is only used in a few E61 style of brewing groups. You can find them with espresso machine brands such asLa Scala, Bezzera, ECM Heidelberg, La Pavoni, Rocket, Grimac and Isomac. This brass disc can be found at the bottom of the drain of various e61 groups. The brass disc has a outer diameter of 15mm and 8mm. the...

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...

the single portafilter on this product page can be used on various Rocket espresso machines. The Rocket part reference for this item is A699905020 This single portafilter has a ear orientation of 90 degree. The thickness of the ears of this portafilter is 5,7mm. The portafilter does come with a stainless steel spring and a single filterbasket. This...

On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....