Gaggia加热元件垫圈61x40x2 mm
€3.50不含税
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
此产品页面上的项目是 OEM/原装 Gaggia 加热元件垫圈。该垫圈的零件参考号为 CA0481
该加热元件垫片的外径为 61mm,内径为 40mm,厚度为 2mm。安装孔之间的距离为 43mm。
这种加热元件垫圈可用于 Gaggia E90 和 Gaggia D90。
详细信息
- 内径(内径)
- 40mm
- 厚度
- 2mm
- 外径(OD)
- 61mm
- 牌
- Gaggia
- 类型
- 原来的
- 类型部分
- 加热元件垫片
- 零件号
- Gaggia CA0481
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
首先是加热元件的法兰,由于法兰型号的不同,这些加热元件在大多数情况下是不能互换的。另一个重要特征是加热元件的长度。如果太长,就无法安装。如果加热元件太短,锅炉中的热量分布就会不均匀。
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.